4 ms·
Would you still trust that it's off when it says that it's off?
by shogun21 9y ago
Would you still trust that it's off when it says that it's off?
- pmiller2 9y agoIf you could open the case and verify that the switch does what it's supposed to do, why not?
- WalterBright 9y agoYup. That's the point of a physical switch.
- craftyguy 9y agoSince the board schematic is presumably proprietary, and the board could be multi-layered, you'd have to do some fairly destructive investigating in order to confirm that the switch is actually doing what it says it is doing.
- drdaeman 9y agoNot as long as it cuts the wire that breaks all connections between board and the microphone(s) (and board is somehow audited to not contain any extra microphones or otherwise sound-sensitive components). <tinfoil hat on>But this is only as long as you actually can verify or trust that the switch is actually a switch and not a device that pretends to be one. A transparent casing where one can visibly confirm the actuator operation is a good idea.</tinfoil hat off>
- 6d6b73 9y agoThe problem with that is that you can turn speaker info a microphone:)
- drdaeman 9y agoTrue, but a multi-pole switch can also cut connection to those.
- SAI_Peregrinus 9y agoIf you want extra tinfoil hattiness, most multilayer ceramic capacitors (the surface mount kind that are everywhere on PCBs) are somewhat microphonic. Condenser microphones, especially electrets are basically just capacitors designed in a special way to maximize this effect.
- drdaeman 9y agoInteresting! I know about condenser mics, but I thought a typical SMDs are way too small to sense anything useful. Had anyone experimented with this?
- SAI_Peregrinus 9y agoThey generally are too small to be useful. That's why I called it "tinfoil hatty". Most of the issues with them come from mechanically coupled vibrations in a system (from fans and the like) flexing the whole circuit board, so it's not as big an issue with phones. Also most of the capacitors are power supply decoupling caps, so difficult to sense variations from. It's mostly just a fiendishly annoying effect in high-sensitivity test equipment.
- WalterBright 9y agoI figure one of those teardown article/video people would tear it down and confirm. If Amazon advertised it as a physical switch, and it was not, that is fraud and actionable.
- craftyguy 9y ago> If Amazon advertised it as a physical switch, and it was not, that is fraud and actionable. A physical switch is still a technically a physical switch, even if it's not connected to anything. It would come down to how they are describing what it does, and what guarantees they make (or not.) Do they have any, or is this discussion entirely hypothetical?
- userbinator 9y agoThey need to advertise it as a physical disconnection of the microphone. The switch doesn't need to be part of the main board --- it could be located next to the mic, so it's trivial for anyone with even the most basic electronics knowledge to see that it does what it says it does.