4 ms·

Doesn't having a cutting board as hard as stone defeat the purpose of having a cutting board?

• dghughes 9y ago
  Isn't the point of a cutting board to protect the counter top from the knife, mobility (move chopped food to another location) and being easy to clean? As opposed to a flat counter top which can get marred with marks, can't move, can be cleaned but not thrown in a sink.
  • fiddlerwoaroof 9y ago
    They also protect the knife blade from damage: if you were to cut directly on stone, the knife hitting the stone would cause it to dull more quickly.
  • tonyarkles 9y ago
    Also to provide a less damaging surface for the knife blade.
  • keevie 9y ago
    I'd say a much more important purpose of a cutting board is to protect the edge of your knife. If you hit the edge of your knife on something really hard, it'll chip, or fold--basically just ruin it. This might not be such a big deal for home cooks with super dull knives (after all, glass cutting boards still exist for some reason!) but for a professional I'd think a cutting board that destroys your knives would be worse than useless.
• tbirrell 9y ago
  The purpose of a cutting board is to protect the things underneath it that are not as hard as stone.
  • ivanhoe 9y ago
    Then you could just use a metal plate or glass, but we use the wood in order to protect the blade of the knife also. You'd have to re-sharp the chef knifes every few minutes if they were used on the surface harder than the blade.
    • washadjeffmad 9y ago
      You should, and it's called steeling. There's a foil edge on very sharp knives that will wrinkle and fold after use on anything, even tomatoes, making the knife feel dull. It's not, and it doesn't require removing metal as with grinding or sharpening, but you can steel to realign that edge or strop to hone it depending on the blade and angle. Even if you don't work with blades often, you've probably seen this depicted in media. It really doesn't matter what the cutting surface is to the knife if you have great technique. Since I don't always, I use thin, flexible plastic barriers. I would never recommend wood outside of having no other choices or using it as part of presentation, mainly because of cross contamination and difficulty in sanitizing if you cook sous vide or serve raw often.
      • ivanhoe 9y ago
        Obviously I meant the stone sharpening, not using the knife steel. And as for the material, many sources say that plastic actually contains more bacteria and that end-grain wood is more gentle to a blade than plastic. On the other hand plastic is easier to clean when it's new, but it's also more prone to cuts than wood and they quickly get dirty (at least in my limited experience). IMHO every board needs to be scraped or sanded from time to time to remove the top layer completely, that's the only way to keep it clean.
• Maken 9y ago
  My guess is that these wood boards would have much less friction than a stone equivalent, unless you had enough money to pay for a polished one.