4 ms·
> if an EM field is composed of photons which have higher energy than light That's not right - visible light is sort of a "midrange" photon energy that's excee
by whatshisface 9y ago
> if an EM field is composed of photons which have higher energy than light
That's not right - visible light is sort of a "midrange" photon energy that's exceeded by ultraviolet, x-rays and gamma rays and preceded by infrared, microwaves and radio waves. Everyday devices emit at low frequencies, with energies significantly below that of visible light. The higher energies (ultraviolet, xray, gamma) absolutely do have images:
- Ultraviolet [https://en.wikipedia.org/wiki/Ultraviolet_photography#/media/File:UV_Portrait.jpg https://en.wikipedia.org/wiki/Ultraviolet_photography#/media...]
- Xray https://en.wikipedia.org/wiki/X-ray#/media/File:Radiograf%C3%ADa_pulmones_Francisca_Lorca.cropped.jpg https://en.wikipedia.org/wiki/X-ray#/media/File:Radiograf%C3...
- Gamma https://en.wikipedia.org/wiki/Gamma_ray#/media/File:VACIS_Gamma-ray_Image_with_stowaways.GIF https://en.wikipedia.org/wiki/Gamma_ray#/media/File:VACIS_Ga...
Now, the photons with lower energies than visible light form an interesting case. First off there's infrared, which is fairly familiar:
- Infrared https://en.wikipedia.org/wiki/Infrared_photography#/media/File:Tree_example_IR.jpg https://en.wikipedia.org/wiki/Infrared_photography#/media/Fi...
Now, as the photon energies get lower the wavelengths get longer. This introduces a problem for lower-energy images: when the wavelength is around the size of the aperture, wave-like things will happen involving the aperture. This tends to blur the images, meaning that for longer and longer wavelengths larger and larger cameras are required to achieve the same level of detail. However, these images still exist - but they are rarely taken of everyday things. Note that the imaging you are talking about (to capture the glowing of everyday electronic devices in low frequencies) would have to happen in the microwave and radio bands - because that's around the frequency at which electronics operate. The result is that a reasonably-sized camera would not be able to take a meaningfully sharp image of a router's "glow."
- Microwave https://en.wikipedia.org/wiki/Microwave_imaging#/media/File:3D_image_of_rebars_with_corrosion_produced_using_microwave_imaging..JPG https://en.wikipedia.org/wiki/Microwave_imaging#/media/File:...
- Radio Waves http://www.gb.nrao.edu/epo/PageMill_Resources/galaxy.jpg http://www.gb.nrao.edu/epo/PageMill_Resources/galaxy.jpg
The radio wave picture depicts a galaxy. Radio imaging setups are usually very large, like this one: http://mstecker.com/pages/astroVLAa15vlad-2c1.htm http://mstecker.com/pages/astroVLAa15vlad-2c1.htm
- saeranv 9y agoSo does this mean infrared wavelengths are around the lower limit for taking images with a reasonable size camera? I've played around with the thermal IR camera attachements for smartphones (i.e https://www.amazon.com/FLIR-ONE-Thermal-Imager-iOS/dp/B00VILVV62 https://www.amazon.com/FLIR-ONE-Thermal-Imager-iOS/dp/B00VIL...) and they're pretty small.
- whatshisface 9y agoThe law for diffraction-limited systems is that the blurred spot size increases linearly with wavelength. (Double the wavelength, all else being equal, means twice as blurry.) Engineering concerns (for example, how big can you manufacture a CCD before it becomes prohibitively expensive?) determine what constitutes an "excessively large camera." Although, because infrared covers a 1000-fold range between visible and micro, I feel like it would be safe to say that cellphone-sized cameras might never be made for microwaves. [0]https://en.wikipedia.org/wiki/Diffraction-limited_system https://en.wikipedia.org/wiki/Diffraction-limited_system