4 ms·
Question: this is a problem because the LED array (as an LED backlight or an OLED display is) all flickers in synchrony, right? Would it still be a problem if e
by derefr 9y ago
Question: this is a problem because the LED array (as an LED backlight or an OLED display is) all flickers in synchrony, right? Would it still be a problem if each LED in the array was hooked up to its own delay line with a randomized-at-the-factory value?
- monochromatic 9y agoThat would probably help some. Really, they should just flicker faster. There’s no reason not to do PWM at a kHz or 10, and nobody is going to see that flickering.
- CamperBob2 9y agoActually, there is a slight problem, in that many people will be able to hear the inverter. It's tough to make a completely silent inverter that works near the peak of human hearing sensitivity. It can be done, but it's likely to be more expensive. Going all the way to 20 kHz+ is probably the best strategy. LEDs can be driven well into the MHz range, but if you go too high, RF emissions compliance starts to become a problem.
- monochromatic 9y agoThat’s a good point. Call it 50 kHz to deal with people who have abnormal hearing response.