3 ms·

This is also available at Seeed Studio: https://www.seeedstudio.com/FST-01-without-Enclosure-p-1276.html https://www.seeedstudio.com/FST-01-without-Enclosure-p-

by sowbug 9y ago

This is also available at Seeed Studio: https://www.seeedstudio.com/FST-01-without-Enclosure-p-1276.html https://www.seeedstudio.com/FST-01-without-Enclosure-p-1276.... By the time you read this, it'll probably be sold out, but I coincidentally signed up about a week ago to be notified when they were in stock, and I got that notification yesterday. It's also possible to have MacroFab https://macrofab.com/ https://macrofab.com/ manufacture these for you on demand, using the KiCad files: http://git.gniibe.org/gitweb/?p=gnuk/gnuk.git http://git.gniibe.org/gitweb/?p=gnuk/gnuk.git The cost for a single unit is about $45, and it drops quickly to around $30 if you order a few.

solotronics 9y ago
I got the last one on Seeed Studio :]
- busterarm 9y ago
  So it was you! lol. Enjoy!
busterarm 9y ago
Blast. I read this, it was in stock, I added to my cart...then the office lunch order showed up and I had to deal with the delivery for 5 minutes. Came back, out of stock. So sad.
- sowbug 9y ago
  If your goal was a small hardware RNG and you don't mind spending some time hacking, then I can save you some money. Buy an ST103F development board ($1.72 shipped to US from China): https://www.aliexpress.com/item/1pcs-STM32F103C8T6-ARM-STM32-Minimum-System-Development-Board-Module-raspberry-raspberri-pi-2-watch-nmd-diy/32786765274.html https://www.aliexpress.com/item/1pcs-STM32F103C8T6-ARM-STM32... Also buy an STLink programmer for it ($1.98 shipped): https://www.aliexpress.com/item/ST-Link-V2-Programming-Unit-mini-STM8-STM32-Emulator-Downloader-M89-New/32636724482.html https://www.aliexpress.com/item/ST-Link-V2-Programming-Unit-... Build https://github.com/texane/stlink/ https://github.com/texane/stlink/ or install OpenOCD. Clone the NeuG repo and build for the Maple Mini target: https://anonscm.debian.org/cgit/gnuk/gnuk/neug.git/ https://anonscm.debian.org/cgit/gnuk/gnuk/neug.git/ Now flash neug.bin to the development board via the STLink, then unplug it and plug the board into your nearest micro-USB cable. You now have a hardware RNG running the same NeuG software on the same processor family as the FST-01. This board doesn't have enough program space to run GnuK, I think. Nor is it in the tiny form factor of the FST-01 that makes it more suitable as a hardware token.
danieldk 9y ago
The FST-01 USB sticks can also be used as gnuk tokens for GnuPG: http://www.fsij.org/doc-gnuk/ http://www.fsij.org/doc-gnuk/ The NitroKey Start has the same STM32F103TB (IIRC) and is more readily available: https://github.com/Nitrokey/nitrokey-start-firmware https://github.com/Nitrokey/nitrokey-start-firmware https://shop.nitrokey.com/shop/product/nitrokey-start-6 https://shop.nitrokey.com/shop/product/nitrokey-start-6 Not sure if an RNG is accessible with the standard firmware (though the NeuG RNG is part of the gnuk firmware).

by sowbug 9y ago

solotronics 9y ago

I got the last one on Seeed Studio :]

busterarm 9y ago
So it was you! lol. Enjoy!

busterarm 9y ago

Blast. I read this, it was in stock, I added to my cart...then the office lunch order showed up and I had to deal with the delivery for 5 minutes. Came back, out of stock. So sad.

sowbug 9y ago
If your goal was a small hardware RNG and you don't mind spending some time hacking, then I can save you some money. Buy an ST103F development board ($1.72 shipped to US from China): https://www.aliexpress.com/item/1pcs-STM32F103C8T6-ARM-STM32-Minimum-System-Development-Board-Module-raspberry-raspberri-pi-2-watch-nmd-diy/32786765274.html https://www.aliexpress.com/item/1pcs-STM32F103C8T6-ARM-STM32... Also buy an STLink programmer for it ($1.98 shipped): https://www.aliexpress.com/item/ST-Link-V2-Programming-Unit-mini-STM8-STM32-Emulator-Downloader-M89-New/32636724482.html https://www.aliexpress.com/item/ST-Link-V2-Programming-Unit-... Build https://github.com/texane/stlink/ https://github.com/texane/stlink/ or install OpenOCD. Clone the NeuG repo and build for the Maple Mini target: https://anonscm.debian.org/cgit/gnuk/gnuk/neug.git/ https://anonscm.debian.org/cgit/gnuk/gnuk/neug.git/ Now flash neug.bin to the development board via the STLink, then unplug it and plug the board into your nearest micro-USB cable. You now have a hardware RNG running the same NeuG software on the same processor family as the FST-01. This board doesn't have enough program space to run GnuK, I think. Nor is it in the tiny form factor of the FST-01 that makes it more suitable as a hardware token.

danieldk 9y ago

The FST-01 USB sticks can also be used as gnuk tokens for GnuPG: http://www.fsij.org/doc-gnuk/ http://www.fsij.org/doc-gnuk/ The NitroKey Start has the same STM32F103TB (IIRC) and is more readily available: https://github.com/Nitrokey/nitrokey-start-firmware https://github.com/Nitrokey/nitrokey-start-firmware https://shop.nitrokey.com/shop/product/nitrokey-start-6 https://shop.nitrokey.com/shop/product/nitrokey-start-6 Not sure if an RNG is accessible with the standard firmware (though the NeuG RNG is part of the gnuk firmware).