4 ms·
Still happy that i went with ryzen for my recent machine. I was sick of intel behavior then, only more so now.
by sandworm101 9y ago
Still happy that i went with ryzen for my recent machine. I was sick of intel behavior then, only more so now.
- theandrewbailey 9y agoI'm not sure what behavior with regards to this bug that you're referring to. From what I heard, Intel is freaking out and trying to fix things. Did I miss something?
- lsiq 9y agoUnrelated to the exploit, am pretty sure he's referring to the questionable anti-competitive practices Intel has engaged in the past decade. Notably, the exclusivity-kickback agreements they arranged with several PC manufacturers. https://www.nytimes.com/2017/09/06/business/intel-eu-antitrust-fine.html https://www.nytimes.com/2017/09/06/business/intel-eu-antitru... As well as making their compiler choose the slowest execution path possible once it identifies it's running on an AMD/non-Intel CPU. http://www.agner.org/optimize/blog/read.php?i=49#49 http://www.agner.org/optimize/blog/read.php?i=49#49
- sandworm101 9y agoThat, the drm stuff, the spying, and the lack of innovation. Amd's more-cores approach really appealed to me.
- ComputerGuru 9y agoCompletely off-topic now, but I've had such a bad experience with the motherboard selection. So many bugs in even the most popular motherboard (X399 Taichi) that have necessitated countless updates, and the bug reports are still coming in. At least with Intel, I could grab a server-class motherboard and guarantee rock-solid feature implementation - with the selection of AMD motherboards available we have even separate yet contradictory settings exposed in the BIOS setup. Pathetic.
- loeg 9y agoWhat bugs have you observed in the X399 Taichi? Coincidentally, I have the same board (since TR launch) and haven't even updated the BIOS -- it just works fine for me.
- ensignavenger 9y agoI had to update my Taichi to support my RAM at full speeds, but other than that, it has worked generally well. My system overall sometimes does not wake back up after going into power save, but I am not sure that is the MB or if it is something else.
- geezerjay 9y ago> I had to update my Taichi to support my RAM at full speeds Unsupported hardware is hardly a bug.
- ensignavenger 9y agoI agree, I don't really think it was a bug at all- I was just commenting that I had only needed to update it that once for that one reason, and other than that, it has worked well. Though given the context, I can see how you might interpret my comment that way :)
- ComputerGuru 9y agoOf course it is. If hardware A is built to a standard S and hardware B claims to fully support that same standard, then issues with A on B are 100% a bug in either A or B.
- ComputerGuru 9y agoVersion 2.0 exposes options for the following on two or more different pages that are not kept in sync and there’s no indication which is followed: * power status after ac power loss * SATA ahci mode enabled * DDR speed * advanced ram timings * enables NICs * cpu overvoltage enabled * iommu enabled status And others I’m forgetting. X399 IOMMU support is completely broken, as well as ASPM. These options must be disabled to even successfully install Windows 10. The X399 Taichi bios shows me tons of options for hardware/controllers that aren’t even physically present. These motherboards cannot run RAM at the rates speeds due to the infinity fabric design. Look at the compatibility list AsRock published. They cannot achieve 2666MHz without jumping up to ram rates for 3200MHz, if I recall correctly. That’s because X399 is built as two separate sockets that happen to share a heatspreader and lga connection, and the interconnect operates at the same speed as the ddr bus; it just can’t keep up with tight timings. After updating to Firmware v2, 4/5 Times the bios says “no connection” when trying to check for online updates (despite the wired connection in both ports plus a 10gbe pcie card), and a full power cycle is needed to try again. This is the first chipset I’ve seen that won’t let me run a stick of ram at a slower speed (but it let me run other ram at slower speeds, so I’m not sure why) and fails to post if I set my ram to less than the XMP 2 setting manually. The bios is built for gamers and overclockers. The options to enable OC are “auto” or “manual” and there is no “stock” or “disabled” option. This wasn’t a platform built for stability. Motherboard manufacturers are treating ThreadRipper as if it were Ryzen, as if we were all gamers and this wasn’t a workstation chipset. Intel lets you run Core i7 on its server boards. AMD won’t let me use a motherboard sold for Epyc with my ThreadRipper CPU. Nor should they have to.. except my current options are all crap. My biggest problem of all is that X399 (not just the Taichi) randomly stops recognizing certain PCI-E cards. My PCI-E 10gbe x520-da2 NIC worked ok for a couple of weeks hen suddenly wasn’t seen any more. I thought it was the card and bought a new one. Same problem. I thought it was the os so I installed another. Same problem. I thought it was the bios so I reset it. Same problem. I manually toggled each option pertaining to PCI in the bios and rebooted to test between each one. Same problem. Took a look on NewEgg. All the x399 boards have 3 star reviews at best, and are filled with similar PCI-E complaints and “worked for a month then stopped working” across all the manufacturers and models. Which isn’t saying much, since there are only a dozen or so, really.