3 ms·
I recently sold my home. I didn't take the plunge with smart switches, but I had Nest thermostats and Nest smoke alarms. I wish I either removed everything bef
by gwbas1c 9y ago
I recently sold my home. I didn't take the plunge with smart switches, but I had Nest thermostats and Nest smoke alarms.
I wish I either removed everything before putting my house on the market, or excluded them all from the sale. The buyer was confused, and the Nest smoke alarms needed to be replaced prior to closing.
The Nest smoke alarms were fine, but due to local fire codes, I needed to have wifi running at inspection time and all of my smoke alarms had to be Nest. I was replacing one a year and still had a few "dumb" smoke alarms in the mix. Unfortunately, my realtor advised me poorly in this situation when I told him my plan was to take the smoke alarms and thermostats with me.
- junkcollector 9y agoFire code requires that fire alarms be networked to alert people in all rooms in the event of a fire. Older un-networked units are grandfathers until you begin replacement. Wifi networking is allowed by the code, but for obvious reasons, the inspector has to verify that it works and is set up correctly which requires running wifi. Personally I would not purchase a home that was configured with nest or other home automation equipment for several reasons. 1) It's a huge security risk. When you buy a home the first thing you do is change the locks because you don't know who the previous owner may have once loaned keys out to. Now you have a bunch of computers in your house giving remote access that may or may not be giving other people access and you can't tell. 2) Most consumer home automation systems have incredibly bad failure states. Those wirelessly networked alarms? When you cheap Chinese wifi router catches fire from a faulty power supply the failure mode is that you die. That's a pretty big oversight. Remember when NEST pushed an untested software update remotely and caused dozens of houses in the Northern Midwest to lose heat in the middle of winter and then be destroyed by broken pipes? 3) Vendor lock in. I don't want the previous owner to lock me into a line of products. Period. I'm sure everyone here remembers when Phillips decided that their smart light sockets would embrace DRM and only accept Phillips brand LED bulbs. They backed down but it is bound to come up again. Not to mention simple incompatibility between competing products and stacks. 4) It's just a damn pain to use most of the time for gain that can be measured almost entirely in novelty factor.
- 0culus 9y agoFire code where? Requirement to be networked is a new thing to me, at least as far as single family dwellings go.
- junkcollector 9y agoI've dealt with it in the state fire code for Massachusetts and Maryland. I believe it is also in the New York and New Jersey code books. I'm unsure of other states but, it is a relatively recent adoption in all of the aforementioned states and I expect that it will be common in nearly all states soon. If it seems to be a bit much just be glad you aren't in Massachusetts where they are currently trying to get arc flash rated 110V breakers added as a requirement to the electric code.
- mindslight 9y ago> trying to get arc flash rated 110V breakers added as a requirement to the electric code. Are you just talking about MA adopting newer versions of the NEC that require AFCI [0] more places, or is there really something new related to arc flash? [0] A proprietary software hellhole, like everything else these days.
- brudgers 9y agoArc fault protection for outlets in dwelling bedrooms was was new in the 2002 NEC. Back then, the only available solution was an arc-fault interrupt circuit breaker. Arc fault receptacles are currently available in the market place... ...however, the code (at least back in 2002) specified protection of all electrical outlets. Receptacles are plugged into outlets. So are hired wired lights, smoke detectors, etc. An outlet is "A point on the wiring system at which current is taken to supply utilization equipment." This means that any literal reading of the code requires arc-fault breakers from a practical perspective since even the outlet into which an arc-fault receptacle is plugged requires protection upstream from the receptacle. On the other hand, building departments often make code interpretations that are politically expedient and that's why some jurisdictions may allow arc-fault receptacles as a means of code compliance.
- dylan-m 9y agoOut of curiosity: are these running their own wifi mesh network, or do they actually rely on a working wifi router? Do … do people realize that power cuts occasionally coincide with house fires?
- gwbas1c 9y agoHonestly, I'm not sure. I thought they had a backup mesh network. I bought them because they speak in English instead of making a series of nonsense beeps; they're easy to silence when you burn something in your kitchen; they send a push alert when they need batteries instead of needing to chase down a random beep in the house; ect, ect. I really don't care about a backup mesh network as long as they are loud enough when there is no network.
- dylan-m 9y agoAh, looked it up, and it seems they must have a separate protocol that they use for interconnect: https://nest.com/support/article/Are-my-Nest-Protects-still-interconnected-if-my-Wi-Fi-goes-down https://nest.com/support/article/Are-my-Nest-Protects-still-.... And apparently it's even sort of a standard. Nifty :) Your comment about requiring wifi frightened me somewhat, but I guess they wanted to check Nest-specific things or something?
- gwbas1c 9y agoI honestly don't know. I couldn't get a straight answer from my realtor. A few days later I was at a bar while their alarm system was getting inspected. I asked one of the pros about the situation and he told me that Nests require a working internet connection in order to pass state inspection, and all of the alarms have to be Nest.