4 ms·
On point, but some addendums: Chicago/NEC isn't viable for HSR until 200mph at least, which means dedicated passenger rails, which means a new corridor anyways
by jcranmer 9y ago
On point, but some addendums:
Chicago/NEC isn't viable for HSR until 200mph at least, which means dedicated passenger rails, which means a new corridor anyways. The CSX route from DC to Pittsburgh isn't particularly great from this purpose. Of course, one of the issues with the Keystone to Harrisburg is that the wye is just north of Philly's station, so either you have to run the locomotive around in Philly or you bypass the stop entirely on the way to NYC.
In terms of engineering, the worst part is going to be the Ridge and Valley section of the Appalachians, roughly Blue Mountain to Bedford if you're following the PA Turnpike. The problem is that you have steep ridges very perpendicular to your direction of travel, which requires either detouring to find a water gap or tunneling through the base. Once you're on the plateau proper, passenger rail can easily handle the grades.
As for your final point: that's the big problem with the Midwest: pretty much nothing's colinear. In contrast, a straight line from from DC to Boston literally passes right through NYC [1] and very near Baltimore, Wilmington, Philly, Trenton, and New Haven, with Hartford, Springfield, and Providence a bit further off.
[1] When I drew it from the Capitol to Boston City Hall, the path over Manhattan was from roughly the northwestern corner of Lower Manhattan to the southeastern corner of Midtown Manhattan.