3 ms·

Low-maintenance and maintenance-free drive shafts are a solved problem, but expensive currently. Locks are a necessity where I live, I don't want to put a €500+

Low-maintenance and maintenance-free drive shafts are a solved problem, but expensive currently. Locks are a necessity where I live, I don't want to put a €500+ bike without 3 ore more locks. I want a lock to fasten the bike to a fixed item (e.g. pole) and both wheels locked to the frame. Then I want an electronic lock. The electronics are dispersed over the whole bike. frontlight, backlight, camera's (I'm thinking 3 or 4), integrated mapping,, electronic lock, possible electric steering make it impossible to put all tech into a detachable unit. It's simply out of the question for a well-designed bicycle. I can see it adding some value for current bicycles though. For the frame I probably want aluminium, because it's cheap and light enough. Shocks are not needed as my country has excellent biking paths. For most other countries shocks don't add too much value, especially not when using the bike in an urban environment. Then they are just maintenance-prone weight-gainers.

mikestew 9y ago
Low-maintenance and maintenance-free drive shafts are a solved problem Shaft-driven bicycles have been a solved problem since the late 1800s. [0] But I’m too lazy to do the conversion needed to determine if 125 1898 dollars is expensive. Bikes in the 1800s were priced more akin to modern cars than modern bikes stamped out in an Asian factory. But it’s been done, and by what was a major brand at the time. I’ve ridden them, they’re heavy (like every other bike back then), but nice to ride. I don’t see why it couldn’t be coupled to a modern set of enclosed planetary gears. [0] http://oldbike.wordpress.com/1898-pope-mfg-columbia-chainless-shaft-drive/ http://oldbike.wordpress.com/1898-pope-mfg-columbia-chainles...
semi-extrinsic 9y ago
Electric steering? But why? Lights: I bought a $15 set of lights off eBay ~3 years ago. The alkaline AAA batteries need replacing a few times a year, nobody can be bothered stealing them because they don't look expensive. Why all the cameras? Why an electronic lock? As for locking both wheels, in my experience changing from QR dropouts to something that requires a simple tool for taking wheels off solves that problem. The tools on my bikes are small enough that I Gorilla tape them to the underside of the seat on each bike. As for shocks being maintenance-prone: my daily commute is on a bike with Suntour shocks from 2002. They've never had maintenance. Basically everything else on the bike has been replaced except for shocks and frame.
- clort 9y ago
  To be honest, a cheap light is a cheap light.. but I have had my rear light stolen before now and had to cycle home in the dark without one (in truth, it was like 1 am and I went via the back roads but I still felt very exposed and pulled off when a car approached). I currently have a rear pannier frame which has a built in reflector and have thought it would be useful for that to be a light, though I can't charge batteries on the bike so they need to be removeable easily. I'm nervous about leaving anything on the bike that is easily removable though.. so a small light is enough. The LED ones these days easily fit in my pocket and are way bright enough for city riding where all you need is visibility. I'm intrigued about that chain drive though..

mikestew 9y ago

Low-maintenance and maintenance-free drive shafts are a solved problem Shaft-driven bicycles have been a solved problem since the late 1800s. [0] But I’m too lazy to do the conversion needed to determine if 125 1898 dollars is expensive. Bikes in the 1800s were priced more akin to modern cars than modern bikes stamped out in an Asian factory. But it’s been done, and by what was a major brand at the time. I’ve ridden them, they’re heavy (like every other bike back then), but nice to ride. I don’t see why it couldn’t be coupled to a modern set of enclosed planetary gears. [0] http://oldbike.wordpress.com/1898-pope-mfg-columbia-chainless-shaft-drive/ http://oldbike.wordpress.com/1898-pope-mfg-columbia-chainles...

semi-extrinsic 9y ago

Electric steering? But why? Lights: I bought a $15 set of lights off eBay ~3 years ago. The alkaline AAA batteries need replacing a few times a year, nobody can be bothered stealing them because they don't look expensive. Why all the cameras? Why an electronic lock? As for locking both wheels, in my experience changing from QR dropouts to something that requires a simple tool for taking wheels off solves that problem. The tools on my bikes are small enough that I Gorilla tape them to the underside of the seat on each bike. As for shocks being maintenance-prone: my daily commute is on a bike with Suntour shocks from 2002. They've never had maintenance. Basically everything else on the bike has been replaced except for shocks and frame.

clort 9y ago
To be honest, a cheap light is a cheap light.. but I have had my rear light stolen before now and had to cycle home in the dark without one (in truth, it was like 1 am and I went via the back roads but I still felt very exposed and pulled off when a car approached). I currently have a rear pannier frame which has a built in reflector and have thought it would be useful for that to be a light, though I can't charge batteries on the bike so they need to be removeable easily. I'm nervous about leaving anything on the bike that is easily removable though.. so a small light is enough. The LED ones these days easily fit in my pocket and are way bright enough for city riding where all you need is visibility. I'm intrigued about that chain drive though..