9 ms·

How the LIDAR tech GM just bought probably works

109 points by deepnotderp 9y ago

generj 9y ago
One of the advantages for solid-state LIDAR has to be an increase in reliability. Nobody wants to buy a car which requires a new LIDAR to be installed after 100,000 miles for the sum of $7,000. Hopefully once production starts and yield rates increase the unit costs can shrink small enough to being becoming feasible for integration into lower-end products like cell phones or laptops. I think there are a lot of cool applications for LIDAR which have been blocked by the current expense.
- cobookman 9y ago
  and Manufacturing / shipping / installation costs
- xbryanx 9y ago
  That brings up an interesting thought. Self-driving cars are going to have to come with automated tests that must be passed for the car to even start. You won't be able to make a choice about whether to drive around with a slightly broken car part like that. Some parts of the system will have to not only work, but work near perfectly or require service.
  - alkonaut 9y ago
    > You won't be able to make a choice about whether to drive around with a slightly broken car part like that. As I mentioned in another post: cars already have these sensors in the form of short range (ultrasound?) sensors for parking. These are regularly covered with ice if you live in a winter climate, and in that situation the parking sensors will continuously beep when you have the car in reverse. A human driver just ignores that and backs out anyway, because you look with your eyes and see nothing, so you assume the warning is false and due to ice. The device isn't even broken, it's just temporarily not able to work until the ice has melted, which is a few hours away when the sun comes up. An autonomous car could just say "I don't trust the readings from the sensors so you are on your own kid" and I'd drive. And that would be sort of fine (although it can't be several dozen mornings then it's annoying). But an autonomous taxi can't do that. This is why I think assistant drivers such as teslas autopilot, that can just defer driving to a human, will be around for a very long time (Decades) before we have fully autonomous cars that can drive without backup driver.
- JoblessWonder 9y ago
  It will probably lead to the advent of the "car as as service" sales model. Although the pushback from traditional dealers will be huge.
  - ivl 9y ago
    Traditional dealers push back against anything and everything, so, that can only be expected.
  - randyrand 9y ago
    For cities yes. For suburbs and rural areas, not as much.
- jacksmith21006 9y ago
  People will not be buying for a long time. Use will come through ride sharing services.
  - mseebach 9y ago
    That's irrelevant. 7 cents per mile in LIDAR costs is expensive, regardless of how the vehicle is owned and it's use charged.
    - Cerium 9y ago
      7 cents per mile on LIDAR would be reasonable in a truly driver-less system. Uber costs like $2.8/mile and vehicle cost estimates are usually around $0.5/mile, leaving a healthy overhead for a driver-less system to live in.
- cma 9y ago
  >Nobody wants to buy a car which requires a new LIDAR to be installed after 100,000 miles for the sum of $7,000. How much does a chauffeur cost for 100,000 miles?
madengr 9y ago
I assume LIDAR is needed since the AI isn't advanced enough to do depth perception? If I can drive with two eye balls, then I'd think a circular camera array would be plenty. Maybe this is what Tesla plans on using (in combination with RADAR).
- Animats 9y ago
  That's what Tesla used until they plowed into cars partially blocking a lane. Four times for which there's video. I've posted the links previously.
- dljsjr 9y ago
  While LIDAR and stereo cameras (as well as RGBD depth cameras like Kinect) both effectively do the same thing, LIDAR typically has a much longer effective range while keeping high resolution. To give you an example, this[1] commercially available sensor head can give great resolution stereo depth at around 10m but the included LIDAR unit is good out to around 30m. LIDAR also has the advantage of operating on a different portion of the EM spectrum. It can sometimes be more well behaved in situations where there might be interference on the visible light wavelengths but not on the LIDAR wavelengths which is typically IR (e.g. extremely bright sunny days). I think that there's a place for both in vehicles as a sort of redundancy. While they both mostly do the same things, they do them in different ways, and if LIDAR can be made cost effective then having both is a huge gain. [1]: https://carnegierobotics.com/multisense-sl/ https://carnegierobotics.com/multisense-sl/
  - ajross 9y ago
    That sensor you linked looks to have its two cameras about 10cm apart. A car is easily 1.5m wide, giving a very cheap 15x increase in range for far objects and beating the LIDAR quote by a ton (and of course you can have multiple camera pairs for different distance ranges of course). I'm with the grandparent: I genuinely don't understand the obsession with LIDAR in this space. It's complicated and fiddly, and seems to be competing with an "obvious" solution involving $3 camera parts.
    - 9y ago
tyingq 9y ago
So "no moving parts" by leveraging optical phased arrays and prisms. I wonder how much their patents restrict others from going the same general route. It does seem like the only obvious truly "no moving parts" solution. MEMS still has moving parts, they are just tiny.
Animats 9y ago
Interesting. Frequency-modulated continuous-wave LIDAR is easy to do as a one-point device. Many such devices have been built. But they're usually short range, such as the discontinued Swiss Ranger, and don't reject ambient light as effectively as pulse systems. Being both eye-safe and sunlight-tolerant is hard. Eye-safe is easier if you can increase the diameter of the outgoing beam. Eye safety is measured based on beam energy through a 1/4" hole (an eye pupil), and if the outgoing beam is made wider (say an inch) the energy per unit area drops. But the optics become bigger. Flash LIDAR units emit a spreading beam, and if you can keep people from getting close to the emitter and staring into it, it's not a big problem. (It's a distance measuring device, so if it detects something at range < 1 foot, it must cut the power way down.) Sunlight tolerant is done with a few tricks. Narrow-band interference filters cut out everything but the color of the beam being used. A pulse LIDAR can outshine the sun for a nanosecond. Continuous-wave systems could in theory operate below the noise threshold, but the detector has to not saturate. Anyway, there are lots of technologies that can work. Continental bought Advanced Scientific Concepts' technology, which is known to work fine; it just cost too much when each unit was built by PhDs in Santa Barbara. Continental is a huge auto parts maker; making a million of something cheaply is what they do.
- deepnotderp 9y ago
  Isn't flash lidar range limited unless at a very high power output?
  - Animats 9y ago
    The peak power output is high, but only for a nanosecond or less.
- wyldfire 9y ago
  > Sunlight tolerant is done with a few tricks. Narrow-band interference filters cut out everything but the color of the beam being used. What about a beam collimator at the detector? It would reject a lot of noise but would cost some power.
- Kelbit 9y ago
deepnotderp 9y ago
I have a genuine question to all the LIDAR experts here: all the optical phased array research I've seen, such as the MIT, UCB and DARPA "SWEEPER" work only has a range of something like 2 meters, and 10 meters after lots of work. All the research papers I've seen also mention that accurate and high power phase shifters are a challenge as well as getting the optical phased array to a high enough output power. On the other hand, Quanergy seems to claim that their standard optical phased array on silicon is getting them 200 meter range and really good specs. Do they have something that academia doesn't have? Also Strobe's advisor's thesis says that their LIDAR only has a range of ~2 meters, isn't that totally unworkable for SDC LIDAR?
- joshvm 9y ago
  The Quanergy system looks like it's doing conventional pulsed time of flight (maybe FMCW, but I don't know). They're operating in a frequency band that lets them put out a lot of power without risking eye safety, which means long range. Pulsed LIDAR is basically limited only by signal to noise, so provided you get some photons back and you know they're 'yours', you can measure long distances.
  - deepnotderp 9y ago
    The DARPA SWEEPER was also pulsed lidar, and it only had a range of 2 meters. And the problem really isn't the regulations for power output at the wavelength, but rather that the optical phased array itself can't put out the necessary power, regulations notwithstanding.
teemwerk 9y ago
Skimming those papers and reading about the silicon tunable lasers was a bit mind blowing. I studied optics a bunch in college but never managed to work it into my electrical engineering job. Might be lame, but I didn't have any clue this kind of integration was possible yet, it's certainly quite exciting. Probably the coolest thing I've read about in quite some time.
kuwze 9y ago
I wonder who is going to buy Luminar[0]. [0]: http://www.businessinsider.com/peter-thiel-backed-austin-russell-launches-luminar-lidar-startup-2017-4 http://www.businessinsider.com/peter-thiel-backed-austin-rus...
baybal2 9y ago
I genuinely don't understand obsession with LIDARs in the autonomous vehicle community, a millimetre wave radar is late seventies tech, does the job many times better, for less money, and can be made by an electronics engineering undergrad from radio shack parts. Commies had them in such abundance that they put millimetre wave imagers (and that was in seventies) on thing as cheap as vision aids for tank drivers, field guns, single shot atgms, and even small arms.
- deepnotderp 9y ago
  Resolution?
  - baybal2 9y ago
    Theoretical one is lower than that of lidar, but in practice a well made mm-wave radar, currently, has superior resolution to commercially available lidars
    - shusson 9y ago
      Yeah some links to actual products would be nice
    - deepnotderp 9y ago
      Can you point to any reasonably priced mm wave radar that has greater than lidar resolution? Genuine question.
      - baybal2 9y ago
        I researched the topic further, I would say that commercial offerings for automotive use with 1<degree resolution are not yet there, but that can be achieved. Generally, to increase resolution you can do following - increase antenna size, increase number of antennas, increase amount of processing power thrown on it. Right now, existing offerings can be improved in all 3 ways with ease.
datenwolf 9y ago
In other words: Swept Source Fourier Domain OCT
iamleppert 9y ago
Wondering why no one has thought of using a Acousto-optic modulator? https://en.wikipedia.org/wiki/Acousto-optic_modulator https://en.wikipedia.org/wiki/Acousto-optic_modulator It's solid state, has a very fast response time, super cheap to manufacture, and can steer a beam with high precision. And they are very efficient, achieving a >90% first-order diffraction efficiency. The AOM material can be solid and thermally insulating (such as glass), so you can get very high power. In the paper cited, they produced a device that had an effective power of 4 mW with active cooling. How are they going to scale this up, taking into consideration first order diffraction depends on the angle of incidence of the incoming beam? The steering mechanism is basically a tunable diffraction grating which means the active area is going to be tiny. Most high power diffraction gratings work by expanding the surface area of the grating, it would still be very expensive to create a large tunable waveguide/grating (think how much it costs to make a CPU die), making the whole cost savings of solid state a moot point. You could make an array of the devices, but you're going to need a ton of them to get the necessary power and reasonable deflection angle range.
- thatcherc 9y ago
  From the Wikipedia page: > Consequently, the deflection is typically limited to tens of milliradians. This is the big drawback with AOMs. They're very precise, but the angle through which they steer beams is small. You would need hundreds of scanners to scan a full circle under the best conditions. AOMs are interesting though in that they provide a way to modulate the frequency of the light they deflect. This is how I've seen them used before: as a very precise way to introduce small frequency shifts into a laser beam for physics research.
samstave 9y ago
OK I have a question, but dont shit on me if you think its stupid: Wouldnt any of these smart cars be able to know they physical volumes of many number of cars, including themselves, as well as communicate with eachother - and share their velocity, direction, volume, intentions so as to have a hive mind of the moving bodies? What if you also just had a beacon which reported this information to other cars in a short network where the driver is human - so the smart cars all know where the human driver operated cars are. Then, in addition, you collect all the point data, from lidar, you subtract the known data points given "a prius with a shape and mass and volume of this moving at a speed of that - and over time you have built out a complete point cloud of the static, non-variable topology? rather than spending $75,000 on one lidar periscope, spend 75,000 on developing a beacon such that all cars are telling eachother where they are, their mass/volume and speed?
- grzm 9y ago
  (Assuming I'm understanding you correctly,) if the issue were only other vehicles, this might be feasible. However, the world includes much more than just the other vehicles on the road, and the road and its environs aren't static. I can imagine something similar to what you're proposing being a part of the overall system, I suspect there will always be the need for something vehicle-based that "sees" the environment.
  - samstave 9y ago
    Yeah I meant in addition to, not instead of. And I was saying that these beacons should be just a part of the car and super cheap. The beacon just says "hey I'm a Prius and this is my speed direction and location" But you'd have to make them completely anon - we already have too much activity tracking. So the devices should cycle through random IDs that just spray out the specs of the vehicle, but they change frequently the ID so you can just say that a smart car would know that it just sees various cars - not that it knows that "Jim is just ahead on the left"
- pattycake 9y ago
  Imagine you are potentially the first autonomous car maker to market. You need to build a car that assumes no other cars can talk to it. The idea you have is good, but is probably a solution that gets addressed much farther down the road.
perlpimp 9y ago
I see a number of beams going forward. I wonder what this tech can do however to avoid side collisions, number of my friends have been involved in those and those are particularly horrifying - perp running red light and ramming on the side. Schematically it can be an interesting problem to solve too.
burntrelish1273 9y ago
How would this be better than / supplement 0 lux-capable machine vision? Rangefinding? Doppler shift relative velocity? If the benefits aren't at least 3x better, it might not be marketable enough to justify the added complexities and costs.
alex_duf 9y ago
Out of complete curiosity, and knowing nothing about these technologies: How does these system avoid interference with other cars? Say if ten exact same car, with the exact same model of LIDAR are on the same street / crossing. Can I expect some noise being received by the sensor?
- qxamak 9y ago
  Yep. Every sensor will receive the output from the other emitters. This problem is actually pretty similar to the problem of sharing the wireless signal spectrum - how do all the cell phones in one area work at the same time? There's a few standard approaches to solving these problems: - Frequency Division: each detector uses a different frequency/wavelength. This approach is very simple to implement, but the usable range of wavelengths for LIDAR is fairly narrow. So we'd run out of choices pretty quickly. - Time Division: each detector is allocated a different operating time slot, so that only one is active at a time. For cell phones, this is relatively easy to implement because they all connect to a central system that can coordinate the timing. But for cars, this would be more difficult since there's no central system that links the detectors on different cars together (although they could still communicate with each other through other means). - Code Division: each detector's output is pulsed in a unique pattern so that the reflected signals will return that same pattern, then the processor can reject any patterns that it didn't send out. This approach is much more complex, but doesn't suffer from many of the drawbacks of the other solutions. Code division is by far the most widely used approach here, but frequency and time division also play a small role as well since different manufacturers/detectors use different wavelengths and not all detectors are being operated at exactly the same time (the time needed to send and receive a single signal is extremely short).
  - alex_duf 9y ago
    thanks!

109 points by deepnotderp 9y ago

One of the advantages for solid-state LIDAR has to be an increase in reliability. Nobody wants to buy a car which requires a new LIDAR to be installed after 100,000 miles for the sum of $7,000. Hopefully once production starts and yield rates increase the unit costs can shrink small enough to being becoming feasible for integration into lower-end products like cell phones or laptops. I think there are a lot of cool applications for LIDAR which have been blocked by the current expense.

cobookman 9y ago
and Manufacturing / shipping / installation costs
xbryanx 9y ago
That brings up an interesting thought. Self-driving cars are going to have to come with automated tests that must be passed for the car to even start. You won't be able to make a choice about whether to drive around with a slightly broken car part like that. Some parts of the system will have to not only work, but work near perfectly or require service.
- alkonaut 9y ago
  > You won't be able to make a choice about whether to drive around with a slightly broken car part like that. As I mentioned in another post: cars already have these sensors in the form of short range (ultrasound?) sensors for parking. These are regularly covered with ice if you live in a winter climate, and in that situation the parking sensors will continuously beep when you have the car in reverse. A human driver just ignores that and backs out anyway, because you look with your eyes and see nothing, so you assume the warning is false and due to ice. The device isn't even broken, it's just temporarily not able to work until the ice has melted, which is a few hours away when the sun comes up. An autonomous car could just say "I don't trust the readings from the sensors so you are on your own kid" and I'd drive. And that would be sort of fine (although it can't be several dozen mornings then it's annoying). But an autonomous taxi can't do that. This is why I think assistant drivers such as teslas autopilot, that can just defer driving to a human, will be around for a very long time (Decades) before we have fully autonomous cars that can drive without backup driver.
JoblessWonder 9y ago
It will probably lead to the advent of the "car as as service" sales model. Although the pushback from traditional dealers will be huge.
- ivl 9y ago
  Traditional dealers push back against anything and everything, so, that can only be expected.
- randyrand 9y ago
  For cities yes. For suburbs and rural areas, not as much.
jacksmith21006 9y ago
People will not be buying for a long time. Use will come through ride sharing services.
- mseebach 9y ago
  That's irrelevant. 7 cents per mile in LIDAR costs is expensive, regardless of how the vehicle is owned and it's use charged.
  - Cerium 9y ago
    7 cents per mile on LIDAR would be reasonable in a truly driver-less system. Uber costs like $2.8/mile and vehicle cost estimates are usually around $0.5/mile, leaving a healthy overhead for a driver-less system to live in.
cma 9y ago
>Nobody wants to buy a car which requires a new LIDAR to be installed after 100,000 miles for the sum of $7,000. How much does a chauffeur cost for 100,000 miles?

madengr 9y ago

I assume LIDAR is needed since the AI isn't advanced enough to do depth perception? If I can drive with two eye balls, then I'd think a circular camera array would be plenty. Maybe this is what Tesla plans on using (in combination with RADAR).

Animats 9y ago
That's what Tesla used until they plowed into cars partially blocking a lane. Four times for which there's video. I've posted the links previously.
dljsjr 9y ago
While LIDAR and stereo cameras (as well as RGBD depth cameras like Kinect) both effectively do the same thing, LIDAR typically has a much longer effective range while keeping high resolution. To give you an example, this[1] commercially available sensor head can give great resolution stereo depth at around 10m but the included LIDAR unit is good out to around 30m. LIDAR also has the advantage of operating on a different portion of the EM spectrum. It can sometimes be more well behaved in situations where there might be interference on the visible light wavelengths but not on the LIDAR wavelengths which is typically IR (e.g. extremely bright sunny days). I think that there's a place for both in vehicles as a sort of redundancy. While they both mostly do the same things, they do them in different ways, and if LIDAR can be made cost effective then having both is a huge gain. [1]: https://carnegierobotics.com/multisense-sl/ https://carnegierobotics.com/multisense-sl/
- ajross 9y ago
  That sensor you linked looks to have its two cameras about 10cm apart. A car is easily 1.5m wide, giving a very cheap 15x increase in range for far objects and beating the LIDAR quote by a ton (and of course you can have multiple camera pairs for different distance ranges of course). I'm with the grandparent: I genuinely don't understand the obsession with LIDAR in this space. It's complicated and fiddly, and seems to be competing with an "obvious" solution involving $3 camera parts.
  - 9y ago

tyingq 9y ago

So "no moving parts" by leveraging optical phased arrays and prisms. I wonder how much their patents restrict others from going the same general route. It does seem like the only obvious truly "no moving parts" solution. MEMS still has moving parts, they are just tiny.

Animats 9y ago

Interesting. Frequency-modulated continuous-wave LIDAR is easy to do as a one-point device. Many such devices have been built. But they're usually short range, such as the discontinued Swiss Ranger, and don't reject ambient light as effectively as pulse systems. Being both eye-safe and sunlight-tolerant is hard. Eye-safe is easier if you can increase the diameter of the outgoing beam. Eye safety is measured based on beam energy through a 1/4" hole (an eye pupil), and if the outgoing beam is made wider (say an inch) the energy per unit area drops. But the optics become bigger. Flash LIDAR units emit a spreading beam, and if you can keep people from getting close to the emitter and staring into it, it's not a big problem. (It's a distance measuring device, so if it detects something at range < 1 foot, it must cut the power way down.) Sunlight tolerant is done with a few tricks. Narrow-band interference filters cut out everything but the color of the beam being used. A pulse LIDAR can outshine the sun for a nanosecond. Continuous-wave systems could in theory operate below the noise threshold, but the detector has to not saturate. Anyway, there are lots of technologies that can work. Continental bought Advanced Scientific Concepts' technology, which is known to work fine; it just cost too much when each unit was built by PhDs in Santa Barbara. Continental is a huge auto parts maker; making a million of something cheaply is what they do.

deepnotderp 9y ago
Isn't flash lidar range limited unless at a very high power output?
- Animats 9y ago
  The peak power output is high, but only for a nanosecond or less.
wyldfire 9y ago
> Sunlight tolerant is done with a few tricks. Narrow-band interference filters cut out everything but the color of the beam being used. What about a beam collimator at the detector? It would reject a lot of noise but would cost some power.
Kelbit 9y ago

deepnotderp 9y ago

I have a genuine question to all the LIDAR experts here: all the optical phased array research I've seen, such as the MIT, UCB and DARPA "SWEEPER" work only has a range of something like 2 meters, and 10 meters after lots of work. All the research papers I've seen also mention that accurate and high power phase shifters are a challenge as well as getting the optical phased array to a high enough output power. On the other hand, Quanergy seems to claim that their standard optical phased array on silicon is getting them 200 meter range and really good specs. Do they have something that academia doesn't have? Also Strobe's advisor's thesis says that their LIDAR only has a range of ~2 meters, isn't that totally unworkable for SDC LIDAR?

joshvm 9y ago
The Quanergy system looks like it's doing conventional pulsed time of flight (maybe FMCW, but I don't know). They're operating in a frequency band that lets them put out a lot of power without risking eye safety, which means long range. Pulsed LIDAR is basically limited only by signal to noise, so provided you get some photons back and you know they're 'yours', you can measure long distances.
- deepnotderp 9y ago
  The DARPA SWEEPER was also pulsed lidar, and it only had a range of 2 meters. And the problem really isn't the regulations for power output at the wavelength, but rather that the optical phased array itself can't put out the necessary power, regulations notwithstanding.

teemwerk 9y ago

Skimming those papers and reading about the silicon tunable lasers was a bit mind blowing. I studied optics a bunch in college but never managed to work it into my electrical engineering job. Might be lame, but I didn't have any clue this kind of integration was possible yet, it's certainly quite exciting. Probably the coolest thing I've read about in quite some time.

kuwze 9y ago

I wonder who is going to buy Luminar[0]. [0]: http://www.businessinsider.com/peter-thiel-backed-austin-russell-launches-luminar-lidar-startup-2017-4 http://www.businessinsider.com/peter-thiel-backed-austin-rus...

baybal2 9y ago

I genuinely don't understand obsession with LIDARs in the autonomous vehicle community, a millimetre wave radar is late seventies tech, does the job many times better, for less money, and can be made by an electronics engineering undergrad from radio shack parts. Commies had them in such abundance that they put millimetre wave imagers (and that was in seventies) on thing as cheap as vision aids for tank drivers, field guns, single shot atgms, and even small arms.

deepnotderp 9y ago
Resolution?
- baybal2 9y ago
  Theoretical one is lower than that of lidar, but in practice a well made mm-wave radar, currently, has superior resolution to commercially available lidars
  - shusson 9y ago
    Yeah some links to actual products would be nice
  - deepnotderp 9y ago
    Can you point to any reasonably priced mm wave radar that has greater than lidar resolution? Genuine question.
    - baybal2 9y ago
      I researched the topic further, I would say that commercial offerings for automotive use with 1<degree resolution are not yet there, but that can be achieved. Generally, to increase resolution you can do following - increase antenna size, increase number of antennas, increase amount of processing power thrown on it. Right now, existing offerings can be improved in all 3 ways with ease.

datenwolf 9y ago

In other words: Swept Source Fourier Domain OCT

iamleppert 9y ago

Wondering why no one has thought of using a Acousto-optic modulator? https://en.wikipedia.org/wiki/Acousto-optic_modulator https://en.wikipedia.org/wiki/Acousto-optic_modulator It's solid state, has a very fast response time, super cheap to manufacture, and can steer a beam with high precision. And they are very efficient, achieving a >90% first-order diffraction efficiency. The AOM material can be solid and thermally insulating (such as glass), so you can get very high power. In the paper cited, they produced a device that had an effective power of 4 mW with active cooling. How are they going to scale this up, taking into consideration first order diffraction depends on the angle of incidence of the incoming beam? The steering mechanism is basically a tunable diffraction grating which means the active area is going to be tiny. Most high power diffraction gratings work by expanding the surface area of the grating, it would still be very expensive to create a large tunable waveguide/grating (think how much it costs to make a CPU die), making the whole cost savings of solid state a moot point. You could make an array of the devices, but you're going to need a ton of them to get the necessary power and reasonable deflection angle range.

thatcherc 9y ago
From the Wikipedia page: > Consequently, the deflection is typically limited to tens of milliradians. This is the big drawback with AOMs. They're very precise, but the angle through which they steer beams is small. You would need hundreds of scanners to scan a full circle under the best conditions. AOMs are interesting though in that they provide a way to modulate the frequency of the light they deflect. This is how I've seen them used before: as a very precise way to introduce small frequency shifts into a laser beam for physics research.

samstave 9y ago

OK I have a question, but dont shit on me if you think its stupid: Wouldnt any of these smart cars be able to know they physical volumes of many number of cars, including themselves, as well as communicate with eachother - and share their velocity, direction, volume, intentions so as to have a hive mind of the moving bodies? What if you also just had a beacon which reported this information to other cars in a short network where the driver is human - so the smart cars all know where the human driver operated cars are. Then, in addition, you collect all the point data, from lidar, you subtract the known data points given "a prius with a shape and mass and volume of this moving at a speed of that - and over time you have built out a complete point cloud of the static, non-variable topology? rather than spending $75,000 on one lidar periscope, spend 75,000 on developing a beacon such that all cars are telling eachother where they are, their mass/volume and speed?

grzm 9y ago
(Assuming I'm understanding you correctly,) if the issue were only other vehicles, this might be feasible. However, the world includes much more than just the other vehicles on the road, and the road and its environs aren't static. I can imagine something similar to what you're proposing being a part of the overall system, I suspect there will always be the need for something vehicle-based that "sees" the environment.
- samstave 9y ago
  Yeah I meant in addition to, not instead of. And I was saying that these beacons should be just a part of the car and super cheap. The beacon just says "hey I'm a Prius and this is my speed direction and location" But you'd have to make them completely anon - we already have too much activity tracking. So the devices should cycle through random IDs that just spray out the specs of the vehicle, but they change frequently the ID so you can just say that a smart car would know that it just sees various cars - not that it knows that "Jim is just ahead on the left"
pattycake 9y ago
Imagine you are potentially the first autonomous car maker to market. You need to build a car that assumes no other cars can talk to it. The idea you have is good, but is probably a solution that gets addressed much farther down the road.

perlpimp 9y ago

I see a number of beams going forward. I wonder what this tech can do however to avoid side collisions, number of my friends have been involved in those and those are particularly horrifying - perp running red light and ramming on the side. Schematically it can be an interesting problem to solve too.

burntrelish1273 9y ago

How would this be better than / supplement 0 lux-capable machine vision? Rangefinding? Doppler shift relative velocity? If the benefits aren't at least 3x better, it might not be marketable enough to justify the added complexities and costs.

alex_duf 9y ago

Out of complete curiosity, and knowing nothing about these technologies: How does these system avoid interference with other cars? Say if ten exact same car, with the exact same model of LIDAR are on the same street / crossing. Can I expect some noise being received by the sensor?

qxamak 9y ago
Yep. Every sensor will receive the output from the other emitters. This problem is actually pretty similar to the problem of sharing the wireless signal spectrum - how do all the cell phones in one area work at the same time? There's a few standard approaches to solving these problems: - Frequency Division: each detector uses a different frequency/wavelength. This approach is very simple to implement, but the usable range of wavelengths for LIDAR is fairly narrow. So we'd run out of choices pretty quickly. - Time Division: each detector is allocated a different operating time slot, so that only one is active at a time. For cell phones, this is relatively easy to implement because they all connect to a central system that can coordinate the timing. But for cars, this would be more difficult since there's no central system that links the detectors on different cars together (although they could still communicate with each other through other means). - Code Division: each detector's output is pulsed in a unique pattern so that the reflected signals will return that same pattern, then the processor can reject any patterns that it didn't send out. This approach is much more complex, but doesn't suffer from many of the drawbacks of the other solutions. Code division is by far the most widely used approach here, but frequency and time division also play a small role as well since different manufacturers/detectors use different wavelengths and not all detectors are being operated at exactly the same time (the time needed to send and receive a single signal is extremely short).
- alex_duf 9y ago
  thanks!