5 ms·
You are assuming the blades separated from the hub. If the fan separated as a unit (someone suggested the shaft may have failed), I would guess it would go forw
by mannykannot 9y ago
You are assuming the blades separated from the hub. If the fan separated as a unit (someone suggested the shaft may have failed), I would guess it would go forwards.
Update: in 1981, the fan of the rear engine on an L-1011 separated, and chewed its way through the inlet duct ("The 'S' duct was damaged internally from next to the fan blades forward about 16 feet") before exiting the fuselage sideways, sending shrapnel into a lavatory and doing serious damage to the flight controls: "The displacement of the fan module in the course of the engine failure sequence caused loss of hydraulic systems A, B, and D and jammed the captain's and first officer's rudder pedals in the neutral position."
The aircraft landed safely, but with a little more damage, the airplane would have been uncontrollable.
https://www.faa.gov/about/initiatives/maintenance_hf/library/documents/media/human_factors_maintenance/eastern_airlines_flight_935.lockheed_l-1011-385.n309ea.near_colts_neck.new_jersey.september_22.1981.pdf https://www.faa.gov/about/initiatives/maintenance_hf/library...