22 ms·
I remember buying a 1GB SCSI drive for $950 pretty much because it was the size of all the disk storage in the machine room at USC when I was attending (three s
by ChuckMcM 9y ago
I remember buying a 1GB SCSI drive for $950 pretty much because it was the size of all the disk storage in the machine room at USC when I was attending (three strings of drives 330MB each string, whohoo!). I was just amazed at one drive that I could buy with as much storage as that entire room. I have it sitting next to an original ST506 drive from Shugart (5MB in 5.25" full height form factor).
Interestingly, still 1 in 10^15 unrecoverable bit error rate[1]. What that means from a practical standpoint is that you are essentially guaranteed an unrecoverable bit read error if you read the drive end to end (as you would if you were re-silvering a RAID 1 mirror), and in a RAID6 configuration I'm guessing it will take about a week to reconstruct a failed drive at low priority. All that storage behind a single port which has a sequential transfer rate of 255 MBs[1].
[1] https://www.wdc.com/content/dam/wdc/website/downloadable_assets/eng/spec_data_sheet/2879-800074.pdf https://www.wdc.com/content/dam/wdc/website/downloadable_ass...
- wiredfool 9y agoI remember my first 1 gig drive, it was a full height 5 1/4" external scsi, with the giant 50 pin cable. You could hear the seeks from other rooms.
- jnwatson 9y agoYou guys are making me feel old. My father bought my first 20 MiB hard drive used for close to $1000. It was the size of a VCR and sounded like a jet engine.
- js2 9y agoI'll join in. My first HD was a 40 MB Seagate 5.25 for $900, attached to an Apple //gs.
- rootusrootus 9y agoI once had a Miniscribe 40MB drive that would actually cause the desk to visibly shake when you were reading & writing to it.
- basicplus2 9y agoMy first HDD was 5mb and it would shake the desk from inside the XT computer too :)
- pavement 9y agoThat was the first hard drive I ever saw, the very first time I was told about hard drives and learned what a hard drive was.
- userbinator 9y agoWhat that means from a practical standpoint is that you are essentially guaranteed an unrecoverable bit read error if you read the drive end to end That sounds scary, but if I remember a research paper from a few years ago (reading smaller drives multiple times over), these are very conservative estimates. Also, I think you're an order of magnitude off --- 10^15 bits is close to 100TB, not 10TB.