3 ms·

If I ever could get my lazy butt in gear, I want to make a video to prove that you can solder competently with a cheap and crappy soldering iron. I have a sold

by cr0sh 9y ago

If I ever could get my lazy butt in gear, I want to make a video to prove that you can solder competently with a cheap and crappy soldering iron. I have a soldering iron that has to be the cheapest of the cheap, that I've had since 1991; I got it when I went to a local votech electronics school fresh from high school. It's something like a 35 watt pencil iron, and the tip is janky like nobody's business. You have to wait like 15 minutes for it to heat up. The tip is not in the greatest shape. But I can tin that puppy up and solder perfectly with it. Now, I'm not saying you could do SMT rework using it, but basic thru-hole is no problem at all. I've assembled tons of things with it over the years. I also have a couple of older temp controlled irons - and they are great tools as well; honestly, I prefer them over my old iron. But I know, at least for myself, that what iron I use doesn't make a difference in the project, but rather the skills I bring to the table. As the old saying goes, "a poor craftsman blames his tools"...

SwellJoe 9y ago
Sure, I'm a poor craftsman in this regard; I don't solder enough to ever be good at it. But, really, when you've gotta wait 15 minutes for it to heat up, and then after a few joints you have to wait some more because it cooled off in the process...really, is it a good, or even usable, tool? I merely found it difficult to use the cheap pencil iron to get good results, because good results required a lot more out of me, mostly in the form of patience waiting for it to get hot. Also, I suspect cheap tools have gotten worse since 1991. I have cheap tools I bought in that era that are higher quality than the same brand/model today. Nonetheless, it's just good advice to use good tools if you do something often. And, sometimes it's good advice to use good tools even if you don't do it often, but expect to do it again in the future (I find myself working on things that require soldering every couple of years, but expect that'll be true for the rest of my life, so I might as well use a decent iron to do it...it's not like they stop working after being stored for a year).

by cr0sh 9y ago

SwellJoe 9y ago

Sure, I'm a poor craftsman in this regard; I don't solder enough to ever be good at it. But, really, when you've gotta wait 15 minutes for it to heat up, and then after a few joints you have to wait some more because it cooled off in the process...really, is it a good, or even usable, tool? I merely found it difficult to use the cheap pencil iron to get good results, because good results required a lot more out of me, mostly in the form of patience waiting for it to get hot. Also, I suspect cheap tools have gotten worse since 1991. I have cheap tools I bought in that era that are higher quality than the same brand/model today. Nonetheless, it's just good advice to use good tools if you do something often. And, sometimes it's good advice to use good tools even if you don't do it often, but expect to do it again in the future (I find myself working on things that require soldering every couple of years, but expect that'll be true for the rest of my life, so I might as well use a decent iron to do it...it's not like they stop working after being stored for a year).