6 ms·
Restoring a Soviet-era analog synthesizer
- Aloha 9y agoI'd call this a servicing more than a restoration. The thing looks incredibly well built with an eye towards serviceability over ease of assembly - pretty much exactly what I would expect for a Soviet built appliance.
- pilsetnieks 9y agoThere was plenty of awful Soviet tech, too - this thing has survived because it had some value, was well built and taken care of but you don't hear about the thousands of pieces of tech that were shoddily made cheap crap (though expensive for a Soviet citizen) and wouldn't last a year without repairs. Soviet tech had to be built for serviceability - people couldn't often afford new things and even if they had the money, there was no guarantee it was even available. And many things just broke down constantly. It even went so far that "a set of golden hands," meaning one could fix a lot of stuff was a valued characteristic in males, and women sometimes may have overlooked other personality flaws in a relationship because of it, like drinking. My grandma had a Soviet TV well into the 90s and even early 2000s, maybe out of sentimental attachment more than anything else. The thing broke down constantly, every 3-4 months at least, and she'd always call a repairman. In the end I think more money was sunk into it than a brand new 4K TV would cost now. It was finally laid to rest when her usual TV repairman died, and the new one found it increasingly difficult to find replacement parts, and finally gave up, and we could at last get her a new TV.
- trhway 9y ago>Soviet tech had to be built for serviceability also there were significant sharing of tech between military industry and consumer (one can say that in many areas the consumer one was just a minor branch off the main military industry, kind of a USSR version of COTS). TVs and control boards of cruise missiles used the same electronic parts and were built using the same skills/processes - the consumer parts (like transistors, etc) were just the ones that didn't make the higher quality military bin (the military binned parts were marked "VPK" - "Voennaya Priemnaya Komissiya"/"military quality check", and these ones you'd prefer to use in your own electronic projects when/if you could get them).
- dfox 9y agoJust a datapoint: lots of czech(oslovak) devices contained large amounts of MH54xx military grade TTL logic, because it was more readily available than lower-spec MH74xx (and I believe that both soviet-made KL555xx-series and east german D1xx-series of SN74xx TTL logic clones didn't have different reliability grades)
- khamisiyah 9y agoTo make a counterexample, my grandmother had a Zil refrigerator she bought in the 1950's (http://i.imgur.com/POw7U6R.jpg http://i.imgur.com/POw7U6R.jpg) that worked for over 50 years until the late 2000's. It would have probably worked another 50, if we hadn't changed it for a modern larger and more energy efficient one.
- pilsetnieks 9y agoWell, yeah - I think most of the stuff was overbuilt by modern standards so it should work for a long time, just that often the build quality would be shoddy, or had improvized components. I didn't mean that one TV example to be the definite example, that was just an anecdote to illustrate the general point.
- myth_drannon 9y agoIt's not only Soviet built things would last longer. US washing machines, refrigerators made in 50-60s also last forever. The ones you buy now, the way the are made and painted will rust in couple of years and will be thrown to garbage in 5 years. And no, it's not because it's cheap to buy a new one, they are just simply bad.
- pilsetnieks 9y agoYou can actually buy decently made appliances nowadays, it's just that the majority of people don't want to spend that much money. A $300 washing machine in the 50s was much better than a current washing machine at the same price but that amount of money in the fifties is $3000 now. A $3000 modern washing machine would probably blow the 50s one out of the water.
- TheOtherHobbes 9y agoUnless you buy insane super-appliances, long-lasting appliances typically cost 2-3 times the consumer average. I bought a Miele washing machine in 1996, and it's still being used today. It was about twice the price of machines that I'd had to before that never seemed to last more than a few years.
- exDM69 9y agoI think that building for serviceability would be better than the planned obsolescence with the latest fad included (washing machines with touchscreens). That doesn't necessarily mean poor quality, even if it sometimes did in the Soviet Union.
- Aloha 9y agoBeing well built says nothing to how durable the parts are that were used to build it - the parts might have been awful - but it was clearly designed to be easy to repair.
- agumonkey 9y agoReminds me I have a PSR-420 to "service"
- nickt 9y agoThat's a great piece of work - it's wonderful to know that old electronics are being cared for. If you're curious to see one in action - https://www.youtube.com/watch?v=zlP5hdPVB18 https://www.youtube.com/watch?v=zlP5hdPVB18
- brooklyn_ashey 9y agoso rad
- myth_drannon 9y agoAnother one : https://youtu.be/6SRYIPlt3z0 https://youtu.be/6SRYIPlt3z0
- stefantalpalaru 9y agoHere's the Alisa 1387 album it mentions at the beginning: https://www.youtube.com/watch?v=3K9g0Kmznxc https://www.youtube.com/watch?v=3K9g0Kmznxc
- eth_hero_11 9y agoNice pictures, wouldn't have said anything, but your commentary was practically unreadable crap. You're trying far too hard. Get rid of all references, cringeworthy grammar, exclamations and do it in straight documentary style (which is what it should be) and it'll be informative and interesting.
- c-smile 9y agoYeah, that's where Open Source was born - in USSR. I do remember that each consumer device was sold there with its schematics, assembly/disassembly and installation instructions. And that was the law.
- ZenoArrow 9y ago> "I do remember that each consumer device was sold there with its schematics, assembly/disassembly and installation instructions. And that was the law." That's interesting. I wonder if there's a archive of those schematics/documents for Soviet consumer devices somewhere.
- thriftwy 9y agoI guess you can just do image search for [принципиальная электрическая схема].
- PoachedSausage 9y agoA lot of western instrumentation and test equipment used to come with full circuit diagrams and assembly info. The understanding was that your HP spectrum analyser or Tektronix scope cost so much money that if it broke then you would have it repaired, and to do the repair you need the circuit diagram.
- dom0 9y agoNot any more, of course. It also deserves to be mentioned that lots of higher-end equipment used a lot of custom parts, and not always out of necessity (like custom µPs in HP multimeters, or stuffing solenoid drivers into unrelated hybrids ... and of course anything handling higher frequencies almost always used some custom chips or selected transistors hidden behind opaque part numbers). Sometimes there are still schematics, Agisight still does it e.g. for low-end power supplies.
- ZenoArrow 9y agoYes, similar information used to be made available for Western electronics. In addition to engineering equipment, consumer electronics such as TVs and radios, and even computers had full schematics at one point. As an example, can see hardware schematics in the Apple II Reference Manual found here: http://www.applelogic.org/UserManuals.html http://www.applelogic.org/UserManuals.html I'm mostly interested in the Soviet material as I'm assuming that because it was a legal requirement the types of documented designs will be more broad, but if you know of an archive of old Western schematics also, I would be interested in taking a look.
- zokier 9y agoThe upside-down mounted capacitors seem weird. They are particularly visible in the modulator board picture[1], but are also on other boards. Anyone know why that was done, or seen such assembly before? [1] http://i.imgur.com/VNEpWkS.jpg http://i.imgur.com/VNEpWkS.jpg
- dom0 9y agoStress relief. Thermal / moisture expansion of the PC board (and this looks like shoddy phenolic paper) bends the leads a tiny bit and the bending forces go through the component. By making the leads longer, they are less stiff and require less force to accommodate, so less drift due to this. It was a relatively common method in precision electronics. There could be other reasons as well, e.g. if these were ceramic capacitors they might do that to avoid cracking issues. (Because ceramic capacitors drift a lot by themselves, a drift/precision explanation does not make sense)
- rdtsc 9y agoI've taken a good amount of Soviet-era electronics apart and those capacitors (the red ones) crack very easily. I think they are ceramic. In fact I remember being deliberately careful around them as they were easy to bend, when reaching in a tighter space to solder or adjust some variable resistors or capacitors.
- thesmok 9y agoI would add that there exists another standard method for stress relief http://we.easyelectronics.ru/Tools/formovka-opornogo-ziga.html http://we.easyelectronics.ru/Tools/formovka-opornogo-ziga.ht... (link in russian).