4 ms·
Night hours are best for shortwave reception. You could also need an external antenna depending on how far you are listening from. Another problem, probably the
by squarefoot 9y ago
Night hours are best for shortwave reception. You could also need an external antenna depending on how far you are listening from. Another problem, probably the biggest one today, which affects reception on these frequencies (and generally on the HF bands) is the radio noise generated by many bad designed switching power supplies and appliances. Switching regulators (power supplies, converters, chargers etc.) for efficiency and size reasons have moved from the tens of KHz through the hundreds of KHz and recently they started working above 1 MHz which means having into our homes one or more transmitters with antennas (mains or output cable) that if not properly designed, filtered and shielded will render reception on HF bands next to impossible.
- criddell 9y agoThanks for the information. The shortwave frequencies still feel very underutilized. When I scan the FM (88 - 108 MHz) and AM (540-1600 kHz) radio frequencies, I pick up a lot of stuff. The shortwave band is relatively vast and feels very sparse. Considering how valuable spectrum is these days, it's hard to believe that we couldn't find a better use for it. Is it because it is so prone to noise that it's less valuable?
- eeZah7Ux 9y agoBandwidth is key. Transmitting digital signals at high rate would eat up most of the spectrum.
- jlgaddis 9y agoThe wavelength at these frequencies is very long, meaning antennas must be very large. In addition, the bandwidth is very small -- you can't exactly encode data on these frequencies for any practical purpose (some digital modes are popular on ham radio bands; e.g. PSK31, RTTY, etc.)
- TheRealEdAbbey 9y agoYep, PSK31 has a baud rate of 31.25 - that's literally 31 bits per second. There's no practical use for that in modern commercial or consumer applications. In amateur bands, symbol rate below 28 MHz is limited to 300 baud.
- vvanders 9y agoAnd anything in the 2M band is also symbol rate limited(I want to say it was 1200baud but I could be wrong). It's really frustrating if you want to do any development with digital modes. [edit] Looked it up, it's a 19.6k symbol rate limit(rather than leave it open and restrict bandwidth). You can carry a ton of data on 2M if you wanted but legally you can't exceed the speed of an old dial up modem.
- lb1lf 9y agoAre US ham bands really symbol rate (rather than bandwidth)limited? Here in LA (Norway, for the ham prefix challenged), we can modulate in whatever way we feel like on 2M, as long as the signal bandwidth does not exceed 18kHz. (So, using a clever modulation scheme, you could get very close to the Shannon limit for the given channel bandwidth and noise level - assuming a very healthy 30dB S/N, one should be able to wring approx. 180kbps from an 18kHz channel. (Granted, in the real world with filters without infinitely steep skirts we'd get nowhere near this - but, let's say you could get 1/3 or so without trying too hard.)
- TheRealEdAbbey 9y agoEssentially, yes. My guess is that it's due to the fact that amateur radio for a long time has been CW and SSB, where there isn't much bandwidth issue. Digital modes are the new kid on the block (especially considering the average age of US hams is probably quite high), so rather than addressing the root issue, they decided just to target that new kid. There are bandwidth restrictions on the 60m band, where amateur radio is secondary.
- benashford 9y agoThere is more than one shortwave band, some are more useful than others and there are fairly large gaps between them, so it would feel sparse even if there were a lot of stations: https://en.wikipedia.org/wiki/Shortwave_bands https://en.wikipedia.org/wiki/Shortwave_bands But as others have said, in many parts of the world there aren't many shortwave stations left. Africa and parts of Asia still have quite a few however.