4 ms·
I figured that "do not copy" label was for the key cutting people to see and deter them from copying it. But I'm not sure if anyone really follows those labels.
by dmix 9y ago
I figured that "do not copy" label was for the key cutting people to see and deter them from copying it. But I'm not sure if anyone really follows those labels.
I get my keys cut at a convenience store down the street. Key cutting is not exactly a sophisticated service market run by specialists. So I doubt there is much stringent ethical procedures or industry reputations to lean on.
Meanwhile someone copying fobs in Toronto for people was publically shamed, which is silly because anyone can buy an RFID copier on Amazon for $30. http://www.cbc.ca/news/canada/toronto/condo-key-fob-copy-1.4151490 http://www.cbc.ca/news/canada/toronto/condo-key-fob-copy-1.4...
Amazingly the building I live in charges $100 for replacement fobs.
- dsfyu404ed 9y agoIf you're important enough you can get the lock makers to make you your own custom blank that they don't sell to anyone else. I ran into this at college when trying to issue a bunch of keys to club members. "Laser cut" keys have a second set of teeth inside one of the low spots in the blank that normal machines can't copy. Luckily, the locks that have the bar to fit the inner teeth are expensive and only important things get them so the hardest part of copying the key was convincing the guy at the hardware store that I just needed copies with the same profile and not the inner teeth.
- michaelt 9y agoI'm not sure if anyone really follows those labels. You're probably right. When people's security needs are great enough to justify paying $150+ per lock, high-end locks offer: (a) Patented keys that the manufacturer only sells to authorized distributors (who are contractually obligated not to cut keys without a key duplication card) (b) have complex designs that can't be cut on standard key-cutting machines and (c) have special 'key control' pins that mean different locksmiths get incompatible locks and key blanks. Needless to say, a sufficiently good 3D scanner & printer (or indeed a sufficiently patient person with a file and a pair of calipers) could bypass these protections.
- 13of40 9y agoSeveral years ago, I lived in an apartment with "do not copy" keys. I took one to the hardware store and they refused to copy it, so I took it home, ground out the words with a Dremel, filled the gap in with solder and polished it flat. Same store happily copied it.