2 ms·
The trick was to add a little circuit to the player which would keep the signal as clean as possible while reinforcing it. I did a similar thing many moons ago
by squarefoot 9y ago
The trick was to add a little circuit to the player which would keep the signal as clean as possible while reinforcing it. I did a similar thing many moons ago by putting an old TTL chip into the C64 Datassette then wire its gates as buffers. The input was connected to a point where I identified the played cassette signal was present and the output after some light filtering went to a RCA plug to which I would connect my Aiwa deck in record mode. Any copy made that way would work much better than the originals: no more failed loads after 25 minutes waits and no more azimuth twiddling to find the sweet spot.