4 ms·
Take care with welding - not every material likes welding, and especially not home-made welding without proper stress relief. Drilling for rivets is also dange
by mschuster91 9y ago
Take care with welding - not every material likes welding, and especially not home-made welding without proper stress relief.
Drilling for rivets is also dangerous when done incorrectly. You do not want to be riding at full steam when the frame cracks, it's nasty.
- deleted 9y ago[deleted]
- slackingoff2017 9y agoReally though it's probably mild steel which is not heat-treatable. Mild steel fairly weak (for steel) but it doesn't get much stronger or weaker from heat exposure and isn't brittle. High carbon, stainless, and fancy stuff is where you can run into problems. In general you won't see this on car or bike frames, too expensive in bulk. If it's a newer bike it's probably aluminum which you can usually still weld with impunity. If it was high grade alloy the heat could matter, but as far as I know nobody cares that much about bike frames. Heat treatment, or "seasoning" in the case of some aluminum is expensive. Source: used to cut up old bikes and weld the frames into crazy chariot contraptions we would tow around
- xapata 9y ago> frame cracks Steel is real, man. It'll bend, not break. But in seriousness, yeah, I was following very closely behind a fellow who snapped his fork jumping over a bump in the road. I almost went over him. Despite the helmet, he lost memory of the accident. I called an ambulance for him and left my number. He called me the next day asking what had happened. It was a nice aluminum frame, looked in good condition. Always check carefully for hairline fractures when buying a used aluminum bike.