4 ms·
I don't get it. It is impossible to identify who receives the packets but TCP/IP requires an acknowledgement that the packets have been received before sending
by cm2187 9y ago
I don't get it. It is impossible to identify who receives the packets but TCP/IP requires an acknowledgement that the packets have been received before sending more packets. Surely the C&C could be tracked from this acknowledgement? Or were they using UDP?
- foota 9y agoIt sounds like the c&c server can detect any signal sent to the decoy host. So a TCP handshake might look like: Victim to decoy: syn CNC to victim posing as decoy, after reading sequence number from message 1: syn ack Victim to decoy: ack
- qb45 9y agoI too wondered about it, unless the communication is 100% unidirectional they must have some means of disguising the source of outgoing packets, probably involving at least source IP spoofing.
- emj 9y agoFor this to work you need: 1. satellite client decoy system that drops packages (not deny) 2. satellite client listening system 3. an other network connection that allowed source spoofing. If you are contacted on the decoy system you just send the syn+ack packet with the other network with a spoofed address. You will be able to receive all the responses on the satellite connection and send all the responses on the source spoofing network connection.
- zkms 9y agoUDP for everything would be workable and would remove the need for any sort of spoofing on the uplink.
- VectorLock 9y agoThat would work for exfiltration, but not for the whole "command and control" part of C&C.