3 ms·
Wow, costs have really come down since I last looked into the space a couple of years ago. Thanks for the info! One last question - I'm seeing .1mm cited as mi
by throwanem 9y ago
Wow, costs have really come down since I last looked into the space a couple of years ago.
Thanks for the info! One last question - I'm seeing .1mm cited as minimum wall thickness in a few places. Legit or bogus in your experience? I'd love to be able to 3d-print complex light diffusers, but that just sounds too good to be true...
- jononor 9y ago0.1 mm layer thickness is standard for an entry level machine. But in XY it is hard to create lines more narrow than the nozzle diameter. Typically 0.4mm, down to 0.2mm is available. There will also be visible lines still. And optically clear prints are ver challenging with FDM. No idea if it would be good enough for your usecase.. Visit a makerspace or use 3dhubs to give it a try?
- StavrosK 9y agoYep, what the sibling comment said. In practice, I've gotten great results with this machine with 50μm step in the Z axis, although yes, my X and Y axes are limited to 400μm. Also yes, optically clear prints are a no-go, as far as I know. You can get transparent PETG, but it will end up looking rather milky after printing. Here are some videos: https://www.youtube.com/watch?v=QkfQri2B0PY https://www.youtube.com/watch?v=QkfQri2B0PY https://www.youtube.com/watch?v=YI0FM_XdrzE https://www.youtube.com/watch?v=YI0FM_XdrzE
- throwanem 9y agoThat's well within tolerances I could live with, I think. And optical clarity is not a requirement! I'm just thinking about complex-shaped translucent diffusers for a design of accent lamp I'm thinking about making - if it works out, I might see if I can sell them to some of the hipster shops around here, and I can see where diffusers might add some appeal. Thanks again for all the info! I really appreciate you taking the time.