3 ms·
Fair point. But how much effort went into getting that print quality out of a machine at that price point? I'm still uncertain that the heavy emphasis is of ne
by throwanem 9y ago
Fair point. But how much effort went into getting that print quality out of a machine at that price point?
I'm still uncertain that the heavy emphasis is of net value, but I'll need to spend some time considering why I feel that way before I can make a coherent argument.
- StavrosK 9y agoI couldn't tell you, a lot of it is just me becoming more experienced at setting its parameters. I made a few minor upgrades, but I don't think it took too much effort to get that quality out of it.
- throwanem 9y agoNow you've got me curious. What's the make and model? And what are running costs like, in terms of feedstock et cetera? I can hardly fit a Bridgeport mill in a one-bedroom apartment, after all, but a 3D printer might well be doable, and even if I still can't work in metal with one, I'd still be able to do a lot more than I easily can now...
- StavrosK 9y agoIt's a Wanhao i3 duplicator. Filament costs around $25/kg, and your mileage will vary, but I think I've only used one spool (1 kg) of filament in the time I've had it or so. $50 of filament will get you a lot of prints, as most prints are a few tens of grams. Size-wise, it's about the size of a microwave.
- throwanem 9y agoWow, costs have really come down since I last looked into the space a couple of years ago. Thanks for the info! One last question - I'm seeing .1mm cited as minimum wall thickness in a few places. Legit or bogus in your experience? I'd love to be able to 3d-print complex light diffusers, but that just sounds too good to be true...
- jononor 9y ago0.1 mm layer thickness is standard for an entry level machine. But in XY it is hard to create lines more narrow than the nozzle diameter. Typically 0.4mm, down to 0.2mm is available. There will also be visible lines still. And optically clear prints are ver challenging with FDM. No idea if it would be good enough for your usecase.. Visit a makerspace or use 3dhubs to give it a try?
- StavrosK 9y agoYep, what the sibling comment said. In practice, I've gotten great results with this machine with 50μm step in the Z axis, although yes, my X and Y axes are limited to 400μm. Also yes, optically clear prints are a no-go, as far as I know. You can get transparent PETG, but it will end up looking rather milky after printing. Here are some videos: https://www.youtube.com/watch?v=QkfQri2B0PY https://www.youtube.com/watch?v=QkfQri2B0PY https://www.youtube.com/watch?v=YI0FM_XdrzE https://www.youtube.com/watch?v=YI0FM_XdrzE
- throwanem 9y agoThat's well within tolerances I could live with, I think. And optical clarity is not a requirement! I'm just thinking about complex-shaped translucent diffusers for a design of accent lamp I'm thinking about making - if it works out, I might see if I can sell them to some of the hipster shops around here, and I can see where diffusers might add some appeal. Thanks again for all the info! I really appreciate you taking the time.