8 ms·
So, the GE9x is a super-high-bypass turbofan that makes unusually heavy use of composites and additive manufacturing techniques, and gains about 10.5 inches in
by throwanem 9y ago
So, the GE9x is a super-high-bypass turbofan that makes unusually heavy use of composites and additive manufacturing techniques, and gains about 10.5 inches in fan diameter (and might shed some pounds) over the GE90 parent design currently used on most 777s. I don't know where Wired is getting the 148in figure - duct or nacelle diameter, maybe. It's right for a 737's fuselage, so maybe the writer took a metaphorical statement as literal. But that's not an unusual size for an engine on a 777, and if you've seen one of these big widebody twins alongside its narrowbody elder cousin - or, better yet, superimposed, as in [1] - you know that it's not really a surprise to hear that the engines of the former are comparable in diameter to the fuselage of the latter.
Wired's really gone down the clickbait hole in the last few years - not that it was ever as substantial as it liked to make itself out, but still disappointing to see.
[1] http://imgproc.airliners.net/photos/airliners/2/0/5/0881502.jpg?v=v40 http://imgproc.airliners.net/photos/airliners/2/0/5/0881502....
- coredog64 9y agoThis same comparison was made at the release of the original GE90 20-something years ago.
- neurotech1 9y agoGE9x has a 133in fan [0] compared to 128in fan for a GE90-110 series. 148in is the Nacelle width. [0] https://en.wikipedia.org/wiki/General_Electric_GE90#GE9X https://en.wikipedia.org/wiki/General_Electric_GE90#GE9X
- throwanem 9y agoFair point. I was looking at the spec for earlier versions of the same engine, which used a fan five inches narrower.
- jcims 9y agoI flew for about two years before ever seeing a widebody in person. I didn't even see the aircraft first, just an impossibly tall vertical stabilizer standing in solitude over the far side of a terminal that I knew was full of other aircraft. Serious WTF moment.