5 ms·
So are there competing standards for 2.5, 5 and 10G over copper or are the copper standards flexible so you will be able to connecto to standard 10G switches wi
by fulafel 10y ago
So are there competing standards for 2.5, 5 and 10G over copper or are the copper standards flexible so you will be able to connecto to standard 10G switches with slower speeds?
And why is sub-5G interesting, isn't the performance end of ethernet at 40G/100G since years ago?
- voltagex_ 10y ago$129 for one of these cards. $500+ and special cabling (?) for 40G.
- SteveNuts 10y agoMost 10Gbit/s Switching devices have SFP+ ports, which can get expensive.
- newman314 10y agoTwinax is pretty cheap, lower latency but has distance limitations.
- omgtehlion 10y agoSFP+ and MM cables are cheap too (look for used on ebay, transceivers are usually $15. Even cheaper if you buy bulk, I managed to get the last batch at $4.8 a pop). Chinese cables (always available) are $2/meter, but you should look at local shops to get them sub $1.
- buzer 10y agoNew MM SFP+s are $16 from fs.com, SM is about double (for 220m, 2km and 10km optics). These days I honestly wouldn't recommend going with multimode for anything new. Use twinax for short distances (e.g. server to ToR) and SM for everything else. The price difference between SM and MM isn't really worth it, especially when taking in account the fact that MM cables usually need to be replaced on each generation.
- omgtehlion 10y agoThis is really nice. Though, do you have experience with these exact modules? I have a bunch of “generic” or “cisco compatible” TXVRs died on me recently, some of them became rx-only, some completely unresponsive. Still alive are finisar-made (or re-branded finisars) and avago. So I prefer used fini/avago to brand-new “compatible” parts.
- olavgg 10y agoIsnt the MM 850nm fiber cables compatible with both SFP+ 10G and SFP28 25G?
- rektide 10y ago> With the forming of the IEEE 802.3bz draft standard under the patronage of the Ethernet Alliance in June 2015, the two NBASE-T and MGBASE-T Alliances are forced to collaborate. https://en.wikipedia.org/wiki/2.5GBASE-T_and_5GBASE-T#History https://en.wikipedia.org/wiki/2.5GBASE-T_and_5GBASE-T#Histor... I would not expect much/any existing 10Gbit hardware to interop.
- deleted 10y ago[deleted]
- profmonocle 10y agoBecause 2.5G works over 100 meters of cat5e and 5G works over 100 meters cat6, so this can be used on existing cabling that's currently limited to 1G. This doesn't really matter in data centers and backbones (which is where you see 40G/100G), but it can be useful in access networks (offices, classrooms, etc.) where the business doesn't want to replace existing cable plant.
- maxmouchet 10y agoAlso 2.5G is interesting for 802.11ac Wi-Fi APs that provides bandwidth >1G. No need for port aggregation.
- kayoone 10y agoNet bandwidth on 802.11ac is nowhere near real 1Gbps though. Most i got out of a good 802.11ac AP that claimed 1,3Gbps was ~500-600Mbps in the real world on very close distance and it falls off pretty fast. Even the ones claiming nearly 2Gbps can't reach real 1Gbps afaik. Still very nice, but Wifi has a lot of overhead.
- devonkim 10y agoThe problem is that a lot of access points advertise n Gbps but that refers to full system bandwidth on multiple channels and such so you got somewhere close to what they were really expecting you to get. Heck, my Ubiquiti Unifi AC Pro can get me a bit over 800 Mbps without a problem in bursts (and it advertises well over 2 Gbps) but the nature of wifi networks is that I won't get that sustained for very long. For home server uses that most people don't have, I absolutely won't be able to work off a pure wireless network for many reasons.
- fulafel 10y agoThis is consistent with the other 802.11 speed ratings, back to 802.11b. You can generally divide the bitrate by 2 to get the maximum practical goodput.
- vlan0 10y ago