6 ms·
Aquantia Launch AQtion 5G/2.5G/1G Multi-Gigabit Ethernet Cards for PCIe
- faragon 10y agoI'll wait until Realtek releases a 3 USD 5-Gbit ethernet NIC chip.
- fulafel 10y agoSo are there competing standards for 2.5, 5 and 10G over copper or are the copper standards flexible so you will be able to connecto to standard 10G switches with slower speeds? And why is sub-5G interesting, isn't the performance end of ethernet at 40G/100G since years ago?
- voltagex_ 10y ago$129 for one of these cards. $500+ and special cabling (?) for 40G.
- SteveNuts 10y agoMost 10Gbit/s Switching devices have SFP+ ports, which can get expensive.
- newman314 10y agoTwinax is pretty cheap, lower latency but has distance limitations.
- omgtehlion 10y agoSFP+ and MM cables are cheap too (look for used on ebay, transceivers are usually $15. Even cheaper if you buy bulk, I managed to get the last batch at $4.8 a pop). Chinese cables (always available) are $2/meter, but you should look at local shops to get them sub $1.
- buzer 10y agoNew MM SFP+s are $16 from fs.com, SM is about double (for 220m, 2km and 10km optics). These days I honestly wouldn't recommend going with multimode for anything new. Use twinax for short distances (e.g. server to ToR) and SM for everything else. The price difference between SM and MM isn't really worth it, especially when taking in account the fact that MM cables usually need to be replaced on each generation.
- omgtehlion 10y agoThis is really nice. Though, do you have experience with these exact modules? I have a bunch of “generic” or “cisco compatible” TXVRs died on me recently, some of them became rx-only, some completely unresponsive. Still alive are finisar-made (or re-branded finisars) and avago. So I prefer used fini/avago to brand-new “compatible” parts.
- olavgg 10y agoIsnt the MM 850nm fiber cables compatible with both SFP+ 10G and SFP28 25G?
- rektide 10y ago> With the forming of the IEEE 802.3bz draft standard under the patronage of the Ethernet Alliance in June 2015, the two NBASE-T and MGBASE-T Alliances are forced to collaborate. https://en.wikipedia.org/wiki/2.5GBASE-T_and_5GBASE-T#History https://en.wikipedia.org/wiki/2.5GBASE-T_and_5GBASE-T#Histor... I would not expect much/any existing 10Gbit hardware to interop.
- deleted 10y ago[deleted]
- profmonocle 10y agoBecause 2.5G works over 100 meters of cat5e and 5G works over 100 meters cat6, so this can be used on existing cabling that's currently limited to 1G. This doesn't really matter in data centers and backbones (which is where you see 40G/100G), but it can be useful in access networks (offices, classrooms, etc.) where the business doesn't want to replace existing cable plant.
- maxmouchet 10y agoAlso 2.5G is interesting for 802.11ac Wi-Fi APs that provides bandwidth >1G. No need for port aggregation.
- kayoone 10y agoNet bandwidth on 802.11ac is nowhere near real 1Gbps though. Most i got out of a good 802.11ac AP that claimed 1,3Gbps was ~500-600Mbps in the real world on very close distance and it falls off pretty fast. Even the ones claiming nearly 2Gbps can't reach real 1Gbps afaik. Still very nice, but Wifi has a lot of overhead.
- devonkim 10y agoThe problem is that a lot of access points advertise n Gbps but that refers to full system bandwidth on multiple channels and such so you got somewhere close to what they were really expecting you to get. Heck, my Ubiquiti Unifi AC Pro can get me a bit over 800 Mbps without a problem in bursts (and it advertises well over 2 Gbps) but the nature of wifi networks is that I won't get that sustained for very long. For home server uses that most people don't have, I absolutely won't be able to work off a pure wireless network for many reasons.
- fulafel 10y agoThis is consistent with the other 802.11 speed ratings, back to 802.11b. You can generally divide the bitrate by 2 to get the maximum practical goodput.
- vlan0 10y ago
- rektide 10y agoHmm. I thought that 2.5Gbit was going to be a single channel. It appears the final 802.3bz spec is 4 channels, basically a 10Gbit at lower clocks. I didn't expect this. Would be interesting to know more on the tradeoffs between the two approaches. How much silicon does four channels going 1/4 take, and using how much power, versus a single higher speed channel?
- wmf 10y agoRunning at lower frequency is how 2.5G can get longer range on cheap cables.
- WatchDog 10y agoIm really surprised that >gb ethernet has taken so long to make it into the consumer realm. These NICs are a start, but there wont be wide adoption until >gb ethernet is integrated into mainstream southbridges.
- zurn 10y agoMost wired ethernet is probably deployed in business settings now, and business desktops are stagnant too. iPhones with choppy 3G/4G killed fast wired consumer broadband.
- mseebach 10y agoI'm not. There are very few compelling consumer LAN usecases, most of what most users do it bounded by their internet connection. Indeed, the tendency is for consumer devices to forego ethernet ports entirely in favour of wifi.
- drewg123 10y agoIts kind of a chicken and egg problem. I'm not aware of any consumer 2.5/5G switches, and 10Gbase-T switches are still more than 10x as expensive as 1Gb/s switches. There's also the lack of a compelling use case. Most consumer NAS boxes are still based on spinning drives, and 1Gb/s is still a reasonable match for a spinning drive. I've had 10GbE equipment in my house for about 12 years (I worked remotely and did drivers for one of the first 10GbE NICS), but I've never had > 1 Gb/s equipment in anything but lab equipment. Eg, not in my home desktop / NAS server, etc.
- ojbyrne 10y agoThere are some NASs with 2x1 GB ethernet connections, which suggests to me there's at least some demand.
- sethhochberg 10y agoI'd bet that's actually a part of what is restricting general demand for 1gbit+ NICs on consumer gear. How many consumer or prosumer applications actually exist where 1gbit/sec isn't sufficient, but a pair of bonded 1gbit/sec NICs still isn't enough? Link aggregation is commonly enough supported and easy enough to configure for the kind of audience who needs it that I suspect this covers much of the demand which might otherwise be served by 5gbit or 10gbit NICs natively.
- eggsome 10y agoCheaper to get an Intel copy direct from China: http://m.ebay.com.au/itm/NEW-Intel-X540-T1-OEM-10G-RJ45-1-Port-S-Ethernet-Converged-Network-Adapter-/292072461278?hash=item4400e013de%3Ag%3A1LoAAOSwCU1Y3mAj&_trkparms=pageci%253A461441e3-39f6-11e7-98af-74dbd1804a97%257Cparentrq%253A0fac18e815c0a88b091063a2fffecae6%257Ciid%253A4 http://m.ebay.com.au/itm/NEW-Intel-X540-T1-OEM-10G-RJ45-1-Po... (Obviously you don't get the adavantage of long range at lower speeds, but the vast majority of people just want faster data transfer in the same room).
- the_angry_angel 10y agoI feel dumb not even having looked whether or not anyone actually produced cloned 10G cards. Have you had any success with them yourself? Is there any data or resource on how trust worthy these clones are? Tempted to order a couple for testing at home with, at some point...
- drewg123 10y agoThere seem to be genuine, but used, 10G NICs from many vendors under $40 (Myricom, Mellanox, Chelsio) which might be a cheaper option for a home lab setup. Even 10Gbase-SR SFP+ modules are cheap used, but for a 2 card setup, I'd go CX4 or SFP-DA / Twinax. Most of the failures we see at work in the field around 10GbE or 40GbE hardware is the SFP+ / QSFP modules.
- yuhong 10y agoThe fun thing is that the 802.3bz standard don't refer to Cat5e or Cat6 but describe the requirements in the standard itself. I wonder if this is due to marketing, for example see Kamal Dalmia's comment in: http://www.anandtech.com/comments/10908/aquantia-launches-new-2g-5g-multi-gigabit-network-controllers-for-pcs http://www.anandtech.com/comments/10908/aquantia-launches-ne...
- drewg123 10y agoDoes anybody know what the power draw is for 10Gb/s mode? The early 10Gbase-T phys pulled ~10w. I know things have gotten considerably better, as I'm finding press releases from 2013 talking about ~1.5w. Has that improved any?
- drewg123 10y agoFound their datasheet too late to edit the above: "6 W at 10 Gbps, 4W at 5 Gbps" from http://www.aquantia.com/wp-content/uploads/AQN-107%20Brief%20051117.pdf http://www.aquantia.com/wp-content/uploads/AQN-107%20Brief%2...
- user5994461 10y ago>>> Today's announcement cements Aquantia's lead in the multi-gigabit Ethernet space, despite already having an apparent 2 year lead over other rivals in this space. Going into a market that everyone avoided on purpose is not a lead. The cards are worthless without the adequate switches, that will never happen because the effort is on 10 gb.
- cnvogel 10y agoWhat's that supposed to mean? Binary only, closed source kernel module? >>> Drivers for both cards will be available ... as well as varieties of Linux (3.10, 3.12, 3.2, 4.2 and 4.4).
- wmf 10y agoThe Linux driver is upstream although they may also provide backports.