3 ms·
You're seeing "reinforced" concrete beams. Parts of a beam are in compression, others are in tension and which part is in which can vary. The mechanical prope
by dsfyu404ed 10y ago
You're seeing "reinforced" concrete beams. Parts of a beam are in compression, others are in tension and which part is in which can vary. The mechanical properties of the concrete and steel compliment each other.
- euroclydon 10y agoSo if the beam is holding a load over a span, then the concrete on the bottom of the beam, which is experiencing tensil force, is doing little? I mean, I assume concrete has poor tensile strength.
- angersock 10y agoWorse than little--it's getting pulled apart. https://www.youtube.com/watch?v=CC_yYLZac_s https://www.youtube.com/watch?v=CC_yYLZac_s
- euroclydon 10y agoThanks. That's reassuring; does not catastrophically fail.
- ghaff 10y agoConcrete's tensile strength is about 10% of its compressive strength. So, yes, unreinforced concrete is quite weak in tension.
- bluthru 10y agoThat's where the rebar is located.
- ars 10y agoFor even greater strength you pre-tension the concrete by externally stretching steel cables inside the concrete, and letting it cure. When you release the external load the concrete is under tremendous compression, and is able to easily resist tension.