13 ms·
How I Made My Own iPhone in China [video]
- overcast 10y agoThis is hilariously awesome.
- therobot24 10y agohe looks so tired at the end of it, the video is well edited too, where he'll skip over what's probably long hours and tedious failures with small or sped up clips
- Veratyr 10y agoBlog post for those who prefer text to video: https://strangeparts.com/how-i-made-my-own-iphone-in-china/ https://strangeparts.com/how-i-made-my-own-iphone-in-china/
- deleted 10y ago[deleted]
- ben174 10y agoGreat experiment, and it looks like a lot of fun. But to be practical, the amount of time + effort + risk required to pull this of would offset any amount of money saved.
- zuck9 10y agoWhat's the risk?
- sja 10y agoPresumably the risk of screwing up and needing to repurchase certain parts and/or spend more time creating it.
- strictnein 10y agoHis $5 battery exploding
- ben174 10y agoRisk of buying a useless or counterfeit part that doesn't end up working in his build.
- 0x0 10y agoI don't know, is it possible that activating iOS might be rejected because the logic board serial number is blacklisted by Apple for any number of reasons?
- superplussed 10y agoThe monetization made off of Youtube should offset all of that and then some.
- bspn 10y agoYeah, I can imagine him turning this into something similar to the "What's Inside" Family" where the goal isn't so much cost-saving vs exploring how things are made.
- esMazer 10y agopretty cool!! more like buying and assembling an iphone from parts tough
- overcast 10y agoWas there something else implied?
- jessaustin 10y agoNo kidding I didn't see any mining or refining of rare earths here...
- Taniwha 10y agoHe did attempt to build a logic board - there a short montage of his frustration trying to do so, and an interview with a guy who teaches the locals how to build them - I've got a lot of experience soldering at that level, I regularly work under a microscope, and I'd avoid trying to solder the really fine caps (more like dust) on those boards
- 2bluesc 10y agoWith a 2-4x standard margin mark-up he hits the price point of a new retail iPhone. Minus his time and Apple support of course. :)
- nodesocket 10y agoA fun hobby and project, but I'm guessing nearly all those parts are knock offs and of very cheap quality.
- jjbiotech 10y agoBecause quality increases when Apple repackages Chinese components in a shiny white case.
- esmi 10y agoDefinitely. Apple should add many QA steps filtering out the vast majority of bad parts. First there would be incoming QA on any received shipments. And any well run assembly line contains many check steps to make sure the unit has good constituent parts. This way you don't burn good parts farther down the line on a unit that was never going to pass. Then there is out going inspection and burn in testing. All that testing increases overall quality and value.
- jjbiotech 10y agoQA/QC isn't exclusive to large companies. DIY hobbyists can do the exact same thing.
- esmi 10y agoIn theory that's possible true but in practice on an iPhone I highly doubt a DIY can do "the exact same thing". For one there are important ports we can't access, like JTAG testing the SOC. And there is a whole other factory OS which we have no idea what it does and why.
- deleted 10y ago[deleted]
- lacampbell 10y agoNail on the head. Some people have a very naive view of manufacturing, QC and supply chains.
- sergiotapia 10y agoFor those curious and don't want to watch the entire video: He uses an iphone backplate, three other parts (touch id etc), and the logic board. So he's using Apple OS.
- cr0sh 10y agoAh - ok, this explains it. I didn't watch the video, and I had it in my mind that he custom built a phone (and they were just using the term as a headline grab). I was trying to figure out how/where he got a 4G module.
- nsxwolf 10y agoI've tried to fix the screen on an iPad and an iPhone. In both cases, I destroyed a ribbon cable connector and rendered the devices useless. I tried to follow the instructions, I tried to use proper tools and go as slowly as possible, and in both cases, the delicate surface mount connectors just turned into powder and flaked right off the board.
- aphextron 10y agoYou must be doing something wrong. I have had my original iPhone 5 since release in 2013. Ive replaced essentailly every part in the phone but the mainboard. I just bought a parts phone on ebay for $20 and completely replaced the digitizer. Battery replacements are $5 and take two minutes. Ive even replaced the entire lightning port assembly for 7$ in parts and an hour of time. Its the most modular easily repaired phone Ive ever owned. Granted though, this is the original iPhone 5. All the newer phones with Touch ID and force touch digitizers are more expensive/complicated. But the notion that Apple phones are not repairable is just false.
- dmd 10y ago> Ive replaced essentailly every part in the phone but the mainboard For fun? Or what? I have several relatives who still have iPhone 4 and 5 (and one with a 3!), and none of them have replaced any components. Why would you need to?
- aphextron 10y agoI've gone through 2 screens and a battery. Also the connectors on the lightning port tend to corrode to the point where it has trouble charging.
- nsxwolf 10y agoI just have very bad luck when things get small. I was so proud of myself when I got all that broken iPad glass off cleanly. Then that happened and it was a really dark moment for me. Currently I'm dealing with an out of warranty Apple Watch where the screen just went and fell right off, and apparently you cannot buy the glue strips for it unless you buy the whole screen. Apple figured out how to stop people from getting glue!
- chirau 10y agoOn top of that 300, add R&D costs, marketing, assembly and shipping and you could very well justify the hefty price we pay for the iPhone. I am actually surprised it cost this much to make custom.
- microcolonel 10y agoFor what it's worth, he did pay for almost all of the assembly. He bought an assembled mainboard, and paid about 70 bucks for the assembly on the screen (in addition to what he already paid for parts).
- justboxing 10y agoYep. In the video comments, he says he spent well over $1000. Justifies the $300 price tag by stating that he didn't need the $700+ worth of parts and tools he purchased. > Strange Parts 4 hours ago > Thanks for subscribing! I spent well over $1000, but a lot of that was parts and tools I didn't end up needing. I'd say it's probably around $300 worth of parts in the actual phone. Source: Direct link to comment: https://www.youtube.com/watch?v=leFuF-zoVzA&lc=z13bd1eposzxsbtp304cedd4womcxn5jmbg.1492016971829084 https://www.youtube.com/watch?v=leFuF-zoVzA&lc=z13bd1eposzxs...
- rtkwe 10y agoThe extra parts cost was from a dead end where he was going to attempt to populate a bare PCB with the various chips etc. Eventually he found someone that told him just how many boards he'd have to make before he'd get a working board trying to do it by hand.
- 2muchcoffeeman 10y agoHe said that some of the parts are refurbished. So $300 is not really the cost of making them right? Apple made a phone from scratch, sold it, someone got the parts and refurbished them to on sell them. So you'd expect the price to be much lower? What's the original cost?
- Taniwha 10y agoWell it doesn't really .. that's what it cost Scotty doing it the way he did. He was making a video to highlight that phones live on after you throw them away. He probably wasn't trying to make a profit, he was trying to make an interesting movie. If you visit the markets where he's buying you'll find a virtual disassembly line breaking down phones into component parts (to logic boards if they still work, and chips if they don't) followed by an assembly line of people making 'new' phones from those parts. The thing is that there are people in the "dodgy cell phone market" (people call it that) who are making a good living (by local norms) building iPhones, sometimes from scratch with recycled parts
- nsxwolf 10y agoHow many of these parts are genuine? Many of the parts are so specific to the iPhone they can't be generic off the shelf components. Some seem impossible to knock off like the SoC or the touch sensors. If you find a genuine part, that works, is it stolen? Some aesthetic problem? Some defect that doesn't quite render it unusable?
- aphextron 10y agoI stay far away from non OEM stuff when repairing iPhones. You can get cracked screen and iCloud locked parts phones on ebay for dirt cheap. Everything but the mainboard is usable.
- bspn 10y agoHe seems to think a lot of the parts are refurbished from original iPhones, with a mix I imagine of pretty good copies. I've bought some non-OEM replacement parts for Android phones and the copies have been pretty phenomenal, so I'm not sure where the mix falls. I had to laugh at the hand-drawn logos on the kiosk of the guys who owned the 'Remove Bubble Machine'.
- scottyallen 10y agoHi, Scotty here - the guy that made the video. bspn pretty much nails it. I don't really know for certain, but I think a lot of the parts are used/refurbished from original iPhones, with a couple parts that are really good copies mixed in. Everything is pretty top notch quality as far as I can tell though. And the screen repair booth art is totally legit. As is their workbench organization scheme.
- bspn 10y agoHi Scotty - awesome video! Do you plan on doing any more builds?
- scottyallen 10y agoYes, absolutely! More videos are on the way.
- oldgun 10y agoMoral of the story is not how cheap YOU can build YOUR phone by $300, but how cheap Chinese electronic parts could mean to the competition and innovation in the whole electronic industry. My personal opinion (not necessarily correct): it means that electronic industry could no longer only compete on low prices but newer designs and newer technologies, for better or worse, because Shenzhen, China can always catch up with your price fast with its astonishingly cheap parts.
- megablast 10y ago> but how cheap Chinese electronic parts could mean to the competition and innovation in the whole electronic industry. There are already plenty of cheap Chinese phones you can buy. Even their flagship phones with top of the line specs are half price. They just don't support all overseas bands yet.
- bitmapbrother 10y agoThe video should have included the costs for the components as he purchased them as it constantly left me wondering.
- rtkwe 10y agoHe answered in a comment. It was about 300 USD in parts but he's not sure because he'd spent a lot of money gearing up to try to populate a bare logic board pcb by hand before someone talked him out of it.
- neotek 10y agoHe said on reddit he spent about $1000 all up including the tools required.
- formula_ninguna 10y agothen it's more expensive than buying a new one.
- rtkwe 10y agoYeah but as I said a lot of those tools were for populating a bare logic board though that he didn't end up doing because a repair shop told him he could expect to waste 4+ boards before making on that worked so I don't really think that's part of the cost of the phone since they weren't used in the final product or making it.
- idank 10y agoMakes me wish you could buy a kit and assemble your own phone. We need someone like Arduino to come along for this kind of tech. Would be awesome to just pick up my old and faithful Hakko and solder some sensor to a phone.
- simonmales 10y agoFairphone offer the reverse. A phone that is designed to be repaired by the end user.
- deleted 10y ago[deleted]
- khedoros1 10y agoDepending on what you're thinking of when you say "phone", you can do that. 3G modem, controller (either a microcontroller like Arduino or one of the smaller Linux-based ARM computers), various LCD options, and either touch or buttons for input. People have built variations on that. Here's an example using a Raspberry Pi, touchscreen, and custom-written UI: https://www.raspberrypi.org/blog/tytelli-a-diy-smartphone/ https://www.raspberrypi.org/blog/tytelli-a-diy-smartphone/
- digi_owl 10y agoDo wonder how it would look if we replaced the B with that new Zero W.
- khedoros1 10y agoPut a smaller GPIO connection on the screen, and you could probably make it 1/3 the thickness of the original one. Still much more powerful than my first Android phone, and you could set it up with much quicker software. Actually getting to feature parity even with most feature phones would take some serious work, though.
- fest 10y agoA guy in local hackerspace is building just that: https://hackaday.io/project/19035-zerophone-a-raspberry-pi-smartphone https://hackaday.io/project/19035-zerophone-a-raspberry-pi-s...
- cr0sh 10y agoI haven't watched the video - but I'm curious where and how he got a 4G LTE module cheaply. I've never found one via Ali Express or TaoBao, but maybe I didn't use the right keywords (or maybe they aren't available as modules?). The best I've been able to find are 3G modules; the 4G ones I have found (from one or two US suppliers) tended to be extremely expensive. EDIT: NVM all - downthread it was explained what this guy did, and how he didn't go true DIY on the whole thing. So no special 4G module needed.
- curiousgal 10y agoGoing full DIY would be nearly impossible if he wants to get iOS up and running, at least I assume so.
- deleted 10y ago[deleted]
- bjackman 10y agoAside from your edit: I have heard (but cannot back up) that there are sometimes things you can buy in person in Shenzhen but not on Taobao. It's hard to believe though.
- SexyCyborg 10y agoNot a lot, usually what happens if it's grey to sell it there are special keywords used or you just ask the TB store owner on PM.
- seltzered_ 10y agoSomewhat reminded me of the fairphone documentary which follows someone trying to build a phone business (i.e. Talking with suppliers/factories/etc.): https://youtu.be/7C-VTPJxWlw https://youtu.be/7C-VTPJxWlw
- tag2 10y agoReally well edited video. Shenzen seems like a crazy awesome place. One thing I noticed was how he would never haggle on the price. He would always accept straight up say yep ok. Either the prices were really good...or being an American he's not so used to the idea of having to haggle the price (or maybe he felt order size was too small to warrant a haggle). However when in Asia always and negotiate, otherwise you're just increasing the prices for the rest of the expats :)
- da02 10y agoAre there other consequences? For example: will people think you are gullible and ready to be taken advantaged if you don't haggle?
- iiv 10y agoWhen purchasing electronics haggling isn't really very common. The haggling comes when you buy in bulk. But you're right, if you buy things on a market in Asia; haggle!
- johanj 10y agoHe has commented on that saying that it isn't very common in the electronics markets, particularly for one-offs or low volume. Apparently you can only really start haggling once you're buying 100+ of something.
- elastic_church 10y agoa friend in the industry will negotiate for you so that you can get volume prices for one-offs
- soperj 10y agoSame here though for things like furniture.
- wolly 10y agoThis isn't your normal Asian market. Most of us are happy that we can even make our clumsy attempts at buying sample quantities without speaking the language nor having a local business. There's little evidence of a "foreigner tax" in effect, if anything you're getting better prices and service because you're a curiosity.
- andoon 10y agoYou can buy refurbished iPhones from AliExpress that more or less are the same: made from parts from several iPhones put together.
- kiallmacinnes 10y agoThere are very few YouTube videos that I particularly enjoy watching, this was one of them. Interesting topic, well filmed given the market circumstances, clear audio, and well edited.. and it definitely didn't hurt that I'm currently learning how to design and build electronics from scratch as a hobby ;)
- beautifulfreak 10y agoYou might like this video about Shenzhen too: https://www.youtube.com/watch?v=SGJ5cZnoodY https://www.youtube.com/watch?v=SGJ5cZnoodY
- ruleabidinguser 10y agoReally can't stand this style of video.
- jimmies 10y agoI really can't stand the style of this comment. You didn't even to bother why you don't like it. Why bother commenting, then?
- ruleabidinguser 10y agoI konw there are others who feel the same, those are the only people im interested in.
- deleted 10y ago[deleted]
- vit05 10y agoAmazing how they use WeChat for everything and how someone's word has value in the negotiations. They hardly use paper, receipts.
- philliphaydon 10y agoPeople run their entire businesses on WeChat. It's rather amazing the trust people have in it. Apparently it's got an estimated value of 80 billion.
- SexyCyborg 10y agoAs a Shenzhen local, I'd consider this video one of very few that present a 100% accurate view of the local hardware and market culture. It's very well done and everything he says is correct and that's unusual.
- timaz 10y agoThat's great to hear that it's accurate! As an American, what differences do you see in the electronics community now that you're an expat in China?
- deleted 10y ago[deleted]
- scottyallen 10y agoI think one of the huge differences in east vs west electronics/maker/hacker communities is the approach of DIY vs using production services. In the US, as a hobbyist with a limited budget, if you want to have a PCB made, you either send it off to OSH Park and wait weeks, or you try and make it yourself and get pretty low quality results. Here in Shenzhen, nobody even considers it. You upload the file to professional board house, and standard turn around is 3-4 days. For $30 more, you can get 24-hour turnaround. So there's just this really different approach of "what can I make myself with the tools I own" versus "what professional services do I have access to, and which of my friends have factories with the right production equipment". As a result, you see stark difference in quality of initial prototypes. The flip side is that I think western makers/hackers are more focused on coming up with completely new ideas, with less of a focus on quality of execution, whereas a lot of chinese makers/hackers/manufacturers are more focused on iterative improvement - how can I be really clever to make something cheaper or easier to produce, that looks like a professional product. Both sides are very clever and creative, but focus on different aspects.
- SexyCyborg 10y ago>The flip side is that I think western makers/hackers are more focused on coming up with completely new ideas, with less of a focus on quality of execution, whereas a lot of chinese makers/hackers/manufacturers are more focused on iterative improvement - how can I be really clever to make something cheaper or easier to produce, that looks like a professional product. Both sides are very clever and creative, but focus on different aspects. Yes, I agree
- namuol 10y agoHa! I met Scotty (the man featured in this video) in Bali, Indonesia about 1.5 years ago. We wound up crossing paths a few more times at a hackerspace after I moved to SF. As you can imagine, he's an incredibly focused but personable guy. Hope to see more videos like this!
- reustle 10y agoI think a lot of us met him there :)
- franciscop 10y agoI see few Hacker Paradise alumni are around here! (:
- Abishek_Muthian 10y agoSo IFixit iPhone repair scores are invalid if you live in Shenzhen.
- gambiting 10y agoThey are usually invalid if you have the right tools and know what you are doing, but they are usually based off an assumption that your average person has a screwdriver and a hair dryer and nothing else. Anything that requires a soldering iron to replace is pretty much a 1/10, even if it's a really simple fix that can be done after looking up some videos on youtube.
- hexagonsun 10y agoawesome video. inspiring, when you finally turned it on... that feeling must've been surreal!
- Animats 10y agoAll those people and all that parts infrastructure, just to repair and recycle one brand of phones. Phone repair training school with posters of iPhone boards on the wall. All those shops selling phone parts. All that specialized equipment for servicing them. I like the "bubble removing" machine, a heated vacuum chamber. It looks like mid 20th century automotive, when there were corners with four gas stations that actually could fix cars, and many automotive machine shops. Why should phones break? It's not like they can't be made much tougher.[1] The real question is, why do people put up with such fragile phones? Is this an interim stage of the technology? Does this stop when iPhone N+1 comes out and the reaction is "yawn?" So what does all that Shentzen parts retail look like when you're building something new? Can you go into those buildings with a bill of materials and come out ready to load your pick and place machine? Can you get boards fabbed one-off while you wait? Or is it all about repair and simple mods? [1] https://www.youtube.com/watch?v=mVPku-xItv8 https://www.youtube.com/watch?v=mVPku-xItv8
- synicalx 10y ago> The real question is, why do people put up with such fragile phones? It's technology, the average punter doesn't give it a second thought beyond "What does this device do?".
- scottyallen 10y agoScotty here, the dude that made the video. I'm not sure I can answer the first set of questions about why phones are fragile. I think it probably has something to do with consumer expectations/tastes around look and size of phones though. But I can give you some answers for your second set of questions. > So what does all that Shentzen parts retail look like when you're building something new? The markets originally started as wholesale components and tools markets to service the electronics factories in Shenzhen, which make a significant fraction of the worlds electronics, particularly commodity electronics. So it actually mostly caters to people building new things, versus repair. But I didn't show any of that in the video. My understanding is that the cell phone repair markets are comparatively much newer, and obviously cater much less to large scale production of new goods. > Can you go into those buildings with a bill of materials and come out ready to load your pick and place machine? Yes, absolutely. There are multiple buildings of distributers that do nothing but sell components on reels to load in pick and place machines. You can even buy a pick and place machine there if you need. > Can you get boards fabbed one-off while you wait? Not quite while you wait. There are a bunch of booths in the markets advertising these sorts of services though. I think the fastest on the PCB fab itself (without assembling any components on it) is 12-hour turn time, and that's pushing it a bit. 24-hour turn time expedited but pretty standard, and 3-4 days is generally the non-expedited standard for the board house I've used. Sometimes a bit longer if they're really busy. A courier on a motorcycle will bring it to your door. > Or is it all about repair and simple mods? The cell phone markets are mainly about repair/refurbishing and simple mods, as far as I can tell. But I don't fully know - there's still a ton more for me to learn. I still feel like I'm barely scratching the surface here.
- throwaway000002 10y ago"I'm really impressed by Apple's engineering. It's so easy to repair and recycle these phones. I've gotta think that Apple's really proud that their phones don't really end up in landfills." He then adds, "But there's also credit due to the many thousands of people here who have figured out how to turn trash like this [shows mangled screen assembly] back into beautiful working phones." Dear friends in Shenzhen, not all Westerner's are as shallow and fantastically, well, douchey as this asshole. We praise you for your ingenuity and unwavering work ethic. Thank you.
- gberger 10y agoI do not understand your comment, what does the author say that makes him a shallow douche?
- petermcnister25 10y agoCalling "shallow" the OP but also calling all people in Shenzhen your friends ¯\_(ツ)_/¯ The 1st person face is a bit shocking, and he does seem a bit naive at some points, but from that to call Scotty Allen "shallow and fantastically douchey asshole" is totally uncalled for.
- neotek 10y agoNothing he said came across as shallow or douchey whatsoever. You, on the other hand...
- formula_ninguna 10y agohow much money did it cost to make this phone?
- deleted 10y ago[deleted]
- singletoon 10y agoOne of the very best documentaries I 've ever watched. My most favorite part on describing modern Chinese culture : the need to replace the logic board, and the seller's reaction : 'legit'. In China people still are, indeed, very honorable.
- dazhbog 10y agoAs a foreigner living in SZ for the past few years, and literally 3 minutes away from the markets, I have to say, well done Scotty for capturing the mess and awesomeness of Huaqiang Bei. Shame that the markets won't stay like this for long though :(
- willhslade 10y agoWhy not?
- dazhbog 10y agoBecause rent prices are going up in huaqiang bei, and the average seller selling passives or other electronic parts cant sell enough to pay the rent. Already there are more and more malls and fashion shops slowly appearing in the area, and landlords will be more and more willing to replace sellers selling resistors over a fancy fashion shop paying double or triple for that space.
- f311a 10y agoHow much fully refurbished iPhone 6S will cost here?