4 ms·
JEDEC officially specs DDR4 RAM up to 2133 MHz. But manufacturers seem to have left this far behind already, with Corsair and G.Skill shipping modules at 4200 M
by sp332 10y ago
JEDEC officially specs DDR4 RAM up to 2133 MHz. But manufacturers seem to have left this far behind already, with Corsair and G.Skill shipping modules at 4200 MHz. I don't see why JEDEC doesn't just add a few more rows to the table of official speeds. The only real advantage for a new spec is to bump the density.
- phkahler 10y ago>> The only real advantage for a new spec is to bump the density. And DDR4 can apparently support 128GB per module. Those apparently exist, but you can't find even a 32GB at Newegg.
- pmalynin 10y agoAbove 8 gigs per module you're going to need buffered ram. Check in the ECC section.
- deleted 10y ago[deleted]
- sscotth 10y agoNot true. I use non-ECC 16GB sticks. https://m.newegg.com/products/N82E16820231974 https://m.newegg.com/products/N82E16820231974
- yuhong 10y agoThat is because we now have 8Gbit DDR4 chips.
- sscotth 10y agoNot true. I use non-ECC 16GB sticks. https://m.newegg.com/products/N82E16820231974 https://m.newegg.com/products/N82E16820231974
- yuhong 10y agoThey are based on TSV.
- ksec 10y agoI am not aware of anyone other Samsung has this http://thememoryguy.com/samsungs-colossal-128gb-dimm/ http://thememoryguy.com/samsungs-colossal-128gb-dimm/ But that was the end of 2015, we are into 2017 and i have yet to see this again on the market. And they are likely very expensive. I really hope DDR5 bumps the spec to 512GB rather then 256GB. Unfortunately the DDR memory / GB prices is actually on the rise. The only thing i could see changes in the market is when all the Fabs from China goes online in 2018, and China continue to pour in tens of billions of money in it.
- yuhong 10y agoIt would probably make sense to talk about the density of each chip here. 16Gbit DDR4 is already in the spec though it is not being made yet.`
- plopz 10y agoWhen you see RAM listed at 4200, its the same as the 2133 but the sticks have been tested to be able to overclock to 4200.
- sp332 10y agoRight, but it's only an "overclock" because the official spec only goes to 2133. And that means that compatibility is very hit-or-miss. It could benefit from being more standardized.
- yuhong 10y agoOne reason why JEDEC didn't standardize them is they often required higher voltages
- DiabloD3 10y agoNo, they've standardized up to 2400. And they better have, because Intel already standardized 2400 as the recommended speed for Skylake.
- speeder 10y agoI have impression JEDEC constantly underestimate what manufacturers can actually do... I bought last year DDR3 RAM, 2400mhz. So, when DDR4 started to be sold, capped at 2133, DD3 2400 was already sort of easy to find (and it is faster than the DDR4 too, due to smaller latency, the few times I decided to run my computer in some OC competition that relied on RAM it ended on the top 1% of the air cooled machines despite not being an exceptional machine neither prepared to OC, Intel XMP runs crazy fast on my machine, the OC people I talked all said it was because of my fast DDR3 RAM).