5 ms·
"a dimensionless way to compare values that vary dramatically on a linear scale" ? So many people totally omit the reference measure, which drives me abolutely
by hprotagonist 10y ago
"a dimensionless way to compare values that vary dramatically on a linear scale" ?
So many people totally omit the reference measure, which drives me abolutely batty, particularly when we're talking about sound.
In air, dB SPL is referenced to 20 micropascals. In water, it's 1 micropascal, so the medium matters.
Since loudness is a psychophysical percept, it's also dirty pool to speak of loudness in this way. Intensity can be quantified, loudness varies by listener.
- pitaj 10y agodecibels aren't only used with reference to sound. For instance, I often use Vdb in the spectrum analyzer if subsequent harmonics are not linearly visible. decibels are just a way to easily express ratios on a logarithmic scale. It's handy for all sorts of things.
- shmageggy 10y agoSo Spinal Tap could have been an even LOUDER band if they had used a smaller reference, say some fraction of a micropascal. Or even gasp 0 micropascals for INFINITE dB. Wow that must be so loud.
- TorKlingberg 10y agoYes, in many fields there is an implicit reference measure that is never mentioned. In radio at least people write dBm to make it clear that it's relative to one milliwatt. But gains and attenuations are just dB, because the reference is irrelevant for a difference between two dB values with the same reference.
- ajross 10y ago> But gains and attenuations are just dB, Which is correct, because a gain is inherently unitless. It's a multiplier on an input signal strength. Likewise a signal/noise ratio is typically expressed as a pure dB measure. There are no units.
- jpmattia 10y ago> Since loudness is a psychophysical percept, it's also dirty pool to speak of loudness in this way. It's worth noting that there are standards for loudness as well. For example: The FCC broadcast spec for commercials uses ITU 1770, which involves a filter. The resulting measurement is then labeled in units of dB LKFS. (LK are filter params, which are fixed by the spec, FS is full-scale, ie this is done digitally. (As an aside, video streaming could sure use some more uniformity for its inline commercials too.))
- matt4077 10y agoI've noticed very recently that Youtube started to play commercials louder than whatever I was watching. I don't remember google stooping to such tricks ever before,
- avn2109 10y agoNot saying you're wrong, but often the ads seem louder than the content without actually dissipating any more power; this is because ad studios are good at dynamic range compression and other sound engineering witchcraft.
- jpmattia 10y ago> I don't remember google stooping to such tricks ever before I kinda doubt that anyone has consciously tried to make the commercials louder than the content. It's a tough problem to get right: The television industry has been at it a lot longer, and they still barely make it work. The digital outlets still seem to be finding their footing on this issue. FD: My biz delivers commercial content to TV, digital and cable outlets (and we normalize the audio). Normalization used to be a bit of a black art, but failure to get the audio levels right results in FCC fines to the stations, so you have to work hard to make it happen.
- contras1970 10y ago> I kinda doubt that anyone has consciously tried to make the commercials louder than the content. It's a tough problem to get right: The television industry has been at it a lot longer, and they still barely make it work. right, that's why commercials are consistently louder than the "content".