5 ms·

Top loaders have no need to lock when they are running for the prevention of putting limbs in them while they are moving. The moment the lid is opened the lid

by Washuu 10y ago

Top loaders have no need to lock when they are running for the prevention of putting limbs in them while they are moving. The moment the lid is opened the lid switch is tripped which shuts the washer off. Maybe you are thinking of a locking mechanism to keep someone from drowning in one?

jamestnz 10y ago
I second this. In NZ most washers are top-loading, and I've never seen one that locks during operation. Instead, if you lift the lid while it is spinning, it engages some kind of emergency-brake and that spinner grinds to a halt in a fraction of a second.
- cma 10y ago
  > it engages some kind of emergency-brake and that spinner grinds to a halt in a fraction of a second. On an HE model if it braked that fast I think the whole washer body would spin around.
brazzledazzle 10y ago
I was told by the guy that delivered my washer that the High Efficiency washers spin dangerously fast which was why it locked. Switching off immediately would still be capable of causing harm.
zymhan 10y ago
When the drum inside a top-loader spins to drain the water, it uses centrifugal force to squeeze the water out. This means it spins extremely fast. For example, this model spins at 710 RPM http://www.aaxon.com/blog/194-speed-queen-top-load-washer-vs-the-maytag-top-load-washer http://www.aaxon.com/blog/194-speed-queen-top-load-washer-vs... However someone else pointed out that if they don't lock the lid, they might engage a brake and stop the drum's spinning if the lid is opened. This achieves a similar goal.
rconti 10y ago
My top-load Whirlpool locks the lid when in operation. It's also an utter piece of crap. No wonder the former owners of the home elected to take their fridge but not their washer/dryer. Do NOT buy a top-load High Efficiency washer. IMO, without an agitator (it just has a nipple-shaped thing at the bottom that serves only to twist drawstrings into knots that absolutely ruin the garment) and without adequate water, a top-loader cannot clean clothes properly. My front-loader at my old place was vastly superior in every way. Probably used less water, too.

by Washuu 10y ago

jamestnz 10y ago

I second this. In NZ most washers are top-loading, and I've never seen one that locks during operation. Instead, if you lift the lid while it is spinning, it engages some kind of emergency-brake and that spinner grinds to a halt in a fraction of a second.

cma 10y ago
> it engages some kind of emergency-brake and that spinner grinds to a halt in a fraction of a second. On an HE model if it braked that fast I think the whole washer body would spin around.

brazzledazzle 10y ago

I was told by the guy that delivered my washer that the High Efficiency washers spin dangerously fast which was why it locked. Switching off immediately would still be capable of causing harm.

zymhan 10y ago

When the drum inside a top-loader spins to drain the water, it uses centrifugal force to squeeze the water out. This means it spins extremely fast. For example, this model spins at 710 RPM http://www.aaxon.com/blog/194-speed-queen-top-load-washer-vs-the-maytag-top-load-washer http://www.aaxon.com/blog/194-speed-queen-top-load-washer-vs... However someone else pointed out that if they don't lock the lid, they might engage a brake and stop the drum's spinning if the lid is opened. This achieves a similar goal.

rconti 10y ago

My top-load Whirlpool locks the lid when in operation. It's also an utter piece of crap. No wonder the former owners of the home elected to take their fridge but not their washer/dryer. Do NOT buy a top-load High Efficiency washer. IMO, without an agitator (it just has a nipple-shaped thing at the bottom that serves only to twist drawstrings into knots that absolutely ruin the garment) and without adequate water, a top-loader cannot clean clothes properly. My front-loader at my old place was vastly superior in every way. Probably used less water, too.