4 ms·
Occam's razor goes on a different path if you know a little bit about the guts of the product. The difference between a top 1% appliance and an average applian
by Spooky23 10y ago
Occam's razor goes on a different path if you know a little bit about the guts of the product.
The difference between a top 1% appliance and an average appliance is probably less than $10 of materials and $5 in labor.
- user5994461 10y agoVery unlikely. Once you work in manufacturing you realize that components are actually very expensive, not a $10 joke.
- mtdewcmu 10y agoI know that weight makes a big difference when shipping parts or complete machines. So the cost of shipping magnifies when you use heavier materials.
- tonyedgecombe 10y agoPerhaps when we buy applicances we should just choose the heaviest one.
- Tepix 10y agoI remember when I disassembled a VCR I was suprised to find a lead weight in it.
- richthegeek 10y agoPresumably to help dampen vibrations from all the spinning parts?
- M_Grey 10y agoDefinitely, you'd have bits rattling around otherwise, and maybe even some harmonic issues. Even if it wasn't a noise issue, it would probably wear out the tapes a lot faster, and lead to more jams. Then of course, you have Beatz headphones, which really are the next best thing to a scam.
- Tepix 10y agoYou're probably correct. At the time I thought it was done to make it feel higher quality.
- gmac 10y agoIf that becomes a popular rule then unfortunately it's fantastically easily gamed.
- Spooky23 10y agoThe spectacular failures in these products that I've seen in the last decade were all skimping. In the case of a refrigerator, the manufacturer undersized the motor, probably to meet some efficiency standard. The previous years model had an adequate motor, which worked much better. I've also seen cases (Whirlpool refrigerators) where they included a rubber nipple that was too narrow, and would either freeze up and clog with biofilm. End result was icing of the condenser and evaporator. (Here's a description of the problem: https://partsdr.com/blog/w10619951-updated-drain-tube-fix-kit https://partsdr.com/blog/w10619951-updated-drain-tube-fix-ki... )
- M_Grey 10y agoCompare the average <$1000 fridge/freezer combo, with a Sub Zero model. My mother has one she's kept running for over 25 years... Meanwhile my cheap apartment-scale fridge was made with chewing gum and hope.
- IgorPartola 10y agoA deep freezer is a very different beast. It is a simpler appliance with very basic components. Far fewer things to break than your combo which has to precisely regulate the temperature and has auto de-icing. I grew up with fridges that needed to be de-iced every few months. Those didn't break much either.
- M_Grey 10y agoSub Zero is a brand, it's not a deep freezer.
- x0x0 10y agoThat 25 year old refrigerator is almost certainly very expensive to operate. Look at the energy use over time: 1990 -> 2015 saw a halving of power usage (1000 kWh/y -> 500 kWh/y) -- over a ten year lifespan with CA electricity at $0.19/kWh, that's $950 in increased energy expenditure as compared to a new refrigerator. ie it would be close to free. http://aceee.org/blog/2014/09/how-your-refrigerator-has-kept-its-co http://aceee.org/blog/2014/09/how-your-refrigerator-has-kept... For refrigerators at least, it doesn't make sense to make them robust enough to last more than 10-15 years since it's worth it to replace them over that time period. My understanding is the vast majority of refrigerators are then recycled. All those metals are valuable.
- kalleboo 10y agoWhen I moved in with my wife, we replaced her 10-year old bachelor-sized fridge with a new one that was over 3x bigger and the new one had nearly the exact same power draw...
- 10y ago