2 ms·
Not hundreds, but they have tested one of the boosters they recovered about 8-10 times through a full flight cycle in Texas. Doing it hundreds of times would co
by Robotbeat 10y ago
Not hundreds, but they have tested one of the boosters they recovered about 8-10 times through a full flight cycle in Texas. Doing it hundreds of times would cost a lot of money just in propellant! And the boosters (pre-Block 5) are supposed to be good for around 10 uses.
And they do test the engines a LOT. Each new engine is separately acceptance-fired (less than full mission, but not just a burp) in Texas, then integrated into a full stage and acceptance-fired again in Texas. Then, the stage is brought to the launch site and a very short static fire test is done. If there are any last-second aborts (i.e. after engine ignition but before clamp release), that puts another short cycle on the engine. So launch will be at least the 4th firing of each engine. And if it's the center engine, it'll do a boost-back burn, an entry burn, and a landing burn. So the engines get a lot of work done even on a nominal mission before we talk about reflying the stages.
And since each Falcon 9 takes 10 engines, that means they do (depending on the mission type) around 40-50 engine firings per launch, so yeah, over a half dozen or so launches, they ARE indeed doing hundreds of engine firings, just not all on the same engine and same booster.