2 ms·
Just want to point out two caveats wrt Raid-Z2/3, and that is have a LOT of ECC Ram (wouldn't suggest less than 16GB, and more than 32 is better). Second is if
by tracker1 10y ago
Just want to point out two caveats wrt Raid-Z2/3, and that is have a LOT of ECC Ram (wouldn't suggest less than 16GB, and more than 32 is better). Second is if you have a hot spare, test your configuration to make sure it loads the hot spare.
Aside: I ran a homebrew FreeNAS (forget the version, was several years ago now) with 12x3TB drives, without ECC, and the version of freenas had a bug that didn't pickup the drive designated as a hot spare when the first drive died... They were horrible Seagate 3tb 7200.xx drives, and they all died way too close together... in the end, lost most of the system... when I finally got around to testing the drives (didn't have the heart/energy after for a while) all but 2 had significant errors.
That's more a knock against Seagate (will NEVER buy from them again) than ZFS though. Will also not likely do a homebrew nas server ever again, didn't save enough over Synololgy that made the cost savings vs. time worthwhile, but ymmv.
- tombert 10y agoI've had pretty good luck on my homebrew FreeNAS server that I ran about a year ago. I only had 8GB of RAM, and I managed to lose drives and replace them without losing data...maybe the bug you had got fixed by the time I used it? Now this server runs on ZFS on Linux using Proxmox, though admittedly I did up the RAM to 32GB.
- tracker1 10y agoThe issue was fixed 2 versions down from the one I had started with... but there were cascading drive failures... wound up putting 4x4TB wd reds in my old synology box, managed to get a few things off of the freenas server, but it died rather painfully... would hard lock after about 10-15 minutes requiring a reboot... start copying again... after a day of that, I had most of my music, some of my commercial software and a few other things... lost all my dvd/br rips, etc... Thinking of another synology box in a few months, bumping to more or larger drives. Though, space would be less of a problem if I were willing to re-rip everything to h.265, finally got my settings for the nv encoder pretty well balanced, just a lot of time.