3 ms·
Most cheap meters have a magnet and a reed-switch to generate pulses. As you noted they will generate pulses with backflow. However the dial count on the meter
by Gibbon1 10y ago
Most cheap meters have a magnet and a reed-switch to generate pulses. As you noted they will generate pulses with backflow. However the dial count on the meter is correct.
Another issue that can come up is older reed switches can chatter as they close and open. Usually input debouncing eliminates that, if the firmware guy didn't screw it up.
Another thing I've seen is sometimes in a meter the magnet will rock back and forth. Careful design is needed to prevent that from causing the reed switch to open and close constantly. (Deboucing won't save you there)
Besides that another thing that happens is if utility selects the wrong scale factor for the meter. That's good for really angry customers if the error is in the utilities favor. If it's in the customers favor they get angry when the utility fixes it.
More sophisticated meters actually sense the actual meter reading using a bizarre electromagnetic sensing technique.