4 ms·
> If the client is moving >10MPH relative to a fixed AP (i.e. you're driving past the AP in your car), Wi-Fi doesn't handle that well. Your movement creates Dop
by JoshTriplett 10y ago
> If the client is moving >10MPH relative to a fixed AP (i.e. you're driving past the AP in your car), Wi-Fi doesn't handle that well. Your movement creates Doppler shift in your RF signal, which Wi-Fi can't adjust for (vs. e.g. LTE which does).
Perhaps current-generation WiFi has more of an issue with that, but I've helped build systems that used a much older generation of WiFi in an ad-hoc (no AP) mode between nodes with a speed differential of Mach 1 (between a rocket and the ground). It worked fine, and lost almost no packets over the course of the flight.
- gcr 10y agoGoodness gracious. What was the range of your network? Trying that on a consumer AP would instantly lose the signal, I'd imagine
- JoshTriplett 10y agoMiles, easily. But we had three major advantages: 1) We had a shoulder-mounted directional antenna pointed at the rocket. 2) The rocket had a cylindrical patch antenna wrapped around it. 3) Wifi channel 1 is in an amateur radio band, which means we can amplify it beyond the normal limits. We ran it at 1W.
- joecool1029 10y agoEh, I run 1W EIRP on consumer equipment and it's legal[1]. Assuming you are in US? Or not? [1]: https://www.air802.com/fcc-rules-and-regulations.html https://www.air802.com/fcc-rules-and-regulations.html
- JoshTriplett 10y agoUS, but TTBOMK it wouldn't have been with the combination of amp and antenna. At the time, we'd looked it up and the legal limit without an amateur license was somewhere in the hundreds-of-milliwatts range.
- lend000 10y agoNormal Wifi is extremely low power by regulation -- the medium itself is capable of much more, and I assume this project used different antennas than you find in your router.