3 ms·
That would be a 3-speed manual with the shift lever on the steering column. I never understood how all those complicated linkages from the column down to the tr
by jessaustin 10y ago
That would be a 3-speed manual with the shift lever on the steering column. I never understood how all those complicated linkages from the column down to the transmission ever seemed like a good idea to an engineer...
- fr0sty 10y agoI had an '82 Chevy pickup with that shifter arrangement and it actually wasn't that bad even though the bushings had long fallen out all the joints so there was a good inch of slop in the travel of each of the arms. Still shifted fine. Unless you didn't get it all the way engaged and the gears would bounce instead of mesh and jam the transmission into 2nd and 3rd at the same time requiring you go get out, open the hood and give the control linkage a good yank before continuing. Still miss that truck...
- jessaustin 10y agoHaha I have enough problems with the shift linkages on an old tractor of mine, on which the shift levers are located 4" above the transmission. I'd hate to have to deal with what you're describing here...
- jschwartzi 10y agoIt's pretty good in an automatic since there are only 3 or 4 positions people use, and it isn't moved while the car is moving.
- peckrob 10y agoWhen I worked for the Park Service, we had this positively ancient Chevy van we inherited from the Air Force. Thing was older than me, I think. No one knew exactly how many miles it actually had on it because the odometer only had five spaces. Anyways, it had a 3-speed column shifter, and the top linkage off the column would often pop out first thing in the morning. You could tell when it happened because it would just shift with no effort, but you wouldn't move. Then, you'd have to pop the hood and fiddle with it until you got the link reconnected. I'm glad 3-speed column shifters are gone.