4 ms·
Interesting. I guess I need to learn more about oil mining tech. I was under the impression that after the initial strike, most of the pressure is released- hen
by sliverstorm 17y ago
Interesting. I guess I need to learn more about oil mining tech. I was under the impression that after the initial strike, most of the pressure is released- hence the pumps we use to extract it.
- jacquesm 17y agoThink about this for a moment: The area you are talking about is very deep under water, a column of 1600 meters, then there is a very large layer of rock. All that stuff weighs down on the saturated rock/oil underneath, and then you poke a hole in that hard top layer of rock. The pressures we're talking about are immense, so high that methane in spite of the temperature is a solid. Containing the pressure is the problem. The only places where pumps are needed to get oil out of the ground are shallow wells, especially in a newly drilled well the pressure will almost always be 'on'. The deeper we drill, the higher that initial pressure will be. Over time, as the well is depleted the pressure can go down, and depending on the substrate the oil is in (usually some kind of porous rock, it's not quite drilling in to a lake of oil down there) this will happen faster or slower. Once a well is 'depleted' the rule is really that there is still plenty of oil down there but it can't be moved to the surface economically. There is plenty of research in this area (such as controlled burns to use the gas pressure from the burn to push the oil to a collecting well), but simply pumping it out is usually not the way things go. My personal big fear about this particular 'gusher' is that the longer it lasts the more the oil under pressure has to erode the wellhead, if it gets to the point where it starts widening the well head (like say the tip of a plasma cutter that is used a bit too long) that the cavity will get larger than what can be plugged up.