3 ms·
I wonder about the idea of running some large hoses /pipes temporarily to help drain the water? Even a 3ft diameter would move a lot of water. Or I also wonde
by mrfusion 10y ago
I wonder about the idea of running some large hoses /pipes temporarily to help drain the water? Even a 3ft diameter would move a lot of water.
Or I also wonder if they could drill into the bottom of the Resavoir and let the water drain into the ground?
- maxerickson 10y agoYou are thinking on the wrong scale. The main spillway has been running at 100000 cubic feet per second. To carry that in 3 foot pipes (7 square foot cross section), you'd need hundreds or thousands of them (so a few just wouldn't do much of anything). Same with trying to bypass the water to somewhere else. To make a difference the bypass needs to be at a similar scale to the spillway, carrying tens of thousands of cubic feet per second.
- hvidgaard 10y agoThe worlds largest pump, located in New Orleans, cost $500 million, cannot move enough to match the spillway. You would need 5 of those to match the flow. But realistically, a pump that can move 10.000 feet^3/s would greatly reduce the stress on the rest of the pathways. Problem is, we cannot just rig up a temporary pump with that capacity.
- maxerickson 10y agoIt's even a pumping station, with 11 pumps. http://www.mvn.usace.army.mil/Portals/56/docs/PAO/FactSheets/WCC.pdf http://www.mvn.usace.army.mil/Portals/56/docs/PAO/FactSheets... Each can do 1740 cubic feet/second. And they are permanently installed and basically don't have anything resembling pipes.
- dzdt 10y agoSee https://what-if.xkcd.com/147/ https://what-if.xkcd.com/147/. Niagra Falls is usually flowing at 100,000 ft^3/sec, the same as the spilway. Granted your 3ft pipe is a bit bigger than a drinking straw, but closer to the straw's scale than the spillway's!