4 ms·
This is really neat. I have question, how hard and what is the procedure for writing the ISA and subsequent microcode to implement your ISA? Do you do this in V
by bogomipz 10y ago
This is really neat. I have question, how hard and what is the procedure for writing the ISA and subsequent microcode to implement your ISA? Do you do this in Verilog or an equivalent? And how about writing the assembler? I would love to hear more about what that entails in a homebrew set up like this.
- nickynickell 10y agoActually designing an ISA is voodoo, but doing the mircrocode is fairly easy. On a tiny little 4-bit design with only a few control lines you can do it by hand. Past a certain point, though, it is essentially impossible to do manually without going insane. It isn't very sophisticated, but the project I mentioned above might satisfy some of your curiosity: https://hackaday.io/project/18859-risk-vee https://hackaday.io/project/18859-risk-vee / https://github.com/cadpnq/risk-vee https://github.com/cadpnq/risk-vee My methodology was to define each microinstruction that made up every instruction (such as "move pc to memory address register"). I then took all of the control lines in my design and assigned them a bit position in the control store. From there it was just a matter of defining each control line symbolically and "assembling" each microinstruction by ORing the appropriate things together.
- bogomipz 10y agoThis looks great! I am going to follow your project. What emulator are you using to design this? I see all the assembler files are js? Can you elaborate on this? From there it was just a matter of defining each control line symbolically and "assembling" each microinstruction by ORing the appropriate things together"? This is basically your decoder then?
- nickynickell 10y agoSo far everything is in Logisim[1], but I'm actually thinking of writing an emulator so I can debug programs quicker. I started a lisp interpreter in risc-v assembly, but testing my code at 3khz (the max logisim will run my design at) was too painful. The assembler and microcode generator are js+node. risk-vee is a really basic (read: dumb) "common bus" design. All of the internal components of the CPU share the same 32-bit data bus. The heart of the control unit is a ROM that is 32-bits wide. Each bit is connected to one of the various things in the CPU. To make generating the microcode easier I defined a mask for each line. Taking "move the PC to the memory address register" as an example: The register that holds the PC has an output enable line, and the memory address register has select/enable and both would need to be high. Pulling a few lines from microcode.js: pc_read = parseBin("0000-0000 0000-0000 0000-0000 0100-0000"); mem_address_write = parseBin("0000-0000 0000-1000 0000-0000 0000-0000"); So the microinstruction we want ends up being pc_read | mem_address_write I feel like I'm simultaneously under- and over-explaining it. [1] http://www.cburch.com/logisim/ http://www.cburch.com/logisim/
- bogomipz 10y agoI understand. Thanks for the explanation. I didn't know about Logism, this is cool. I can't wait to play with this. Thanks for the link!