4 ms·
I took mine in for an oil change and they also removed that drain plug panel. In addition they broke the plastic cover for the cabin air filter by over-tighten
by mulmen 10y ago
I took mine in for an oil change and they also removed that drain plug panel. In addition they broke the plastic cover for the cabin air filter by over-tightening the bolt that holds it on.
It's a staggering level of incompetence.
- overcast 10y agoYeh it's crazy, and you reminded me about the coolant cap they didn't fully tighten as well! All things you find out about six months later, when alarms go off. No way to every hold anyone accountable.
- mulmen 10y agoI changed the oil myself the next time and they had the filter cover torqued down so tight I had to make a wrench out of an old timing belt to get enough leverage to remove it. The cap has a torque spec printed right on it that is much lower than whatever the dealer tightened it to. The amazing thing isn't just the degree to which they make mistakes it's the frequency. More often than not they are doing the job wrong.
- overcast 10y agoI've always changed my own oil, and at every 7500, rather than the insane 15000 BMW states for their service intervals. So while it was in warranty, I took advantage of the 15000 mile changes, and did my own in between. In hindsight, it's not even worth my time, and I won't be doing it again with a future car. Oil change is quick, and you can get 5L Liqui Moly for much cheaper than "BMW" brand oil.
- mulmen 10y agoThis is exactly what I do, down to the oil. BMW made it really easy with the access flap for the drain plug and there are convenient jacking points on the subframe. The service calls for more than just changing oil but I'm not confident that the dealer even does all the "extra" things they claim. My car is due for a brake fluid flush soon, not sure if I will do that myself or have the mechanic do it.
- mschuster91 10y ago> My car is due for a brake fluid flush soon, not sure if I will do that myself or have the mechanic do it.My car is due for a brake fluid flush soon, not sure if I will do that myself or have the mechanic do it. Leave brake fluid stuff to the experts. If you manage to get any moisture or air into your brake systems, say goodbye to your brakes. Back when I had a car, I did everything by myself except brakes, engine works and steering - mess up on these three and you can end up dead.
- overcast 10y agoTo be fair, brakes are stupid easy to replace. I did my girlfriends pads, rotors, calipers by myself, for the first time ever, just watching some online videos. I certainly would not pay someone to replace pads / rotors. The only thing you really need for that is a brake spreader tool, which is free to rent from Autozone type places. Regarding flushing brake fluid, you can bring it a place if you're not comfortable, but it's really not difficult either.
- ars 10y ago> The only thing you really need for that is a brake spreader tool, which is free to rent from Autozone type places. A large C-clamp and the old pad work just fine.
- overcast 10y agoDepends on the car, the woman's civic was this cross pattern, that had to be cranked out.
- mulmen 10y agoNot sure what you mean by cross pattern but most cars have their braking system split up into two systems that are diagonally opposite. This way a failure in one only results in a loss of 50% of braking instead of up to 80% if the front fails. The cross bleeding is done to maintain the balance in the system and prevent the sensors from improperly detecting a failure in the brake system.