3 ms·
Okay, I have to respond because there is a lot of misinformation flying around. MSDS's are good, but you'll go nuts trying to accommodate all of them. 1) Safe
by bsder 10y ago
Okay, I have to respond because there is a lot of misinformation flying around.
MSDS's are good, but you'll go nuts trying to accommodate all of them.
1) Safety glasses. Safety glasses. SAFETY GLASSES. I can't mention this enough. Most injuries can be adjusted to accommodate--losing your eyes isn't like that. And, if you're using one of the more powerful lasers, get the specialty glasses for that.
2) Soldering doesn't really vaporize lead. There are other nasty things in the flux and board (Chlorine radicals are particularly bad). Keep your area ventilated and try not to inhale stuff. Fume hoods are excellent, but nobody I know who does this ever used one. An open window or open garage door generally is good enough for soldering.
3) Use leaded solder. Yes, I said it. Lead-free solder sucks to work with by hand. Lead-free solder takes a lot more heat and vaporizes more garbage than leaded solder, not less. One of the best ways to desolder lead-free solder is actually to add leaded solder and then desolder the result since it now melts at a lower temperature.
4) Too many people store their solder paste in the same fridge with food. That's a problem. Solder balls get everywhere very easily.
5) Arc welding is nasty. Old school shielded metal arc welding (stick welding) vaporizes all manner of nasty stuff. Use MIG or TIG instead--they still vaporize stuff but way less. They're better welds anyway. Also be careful about welding things like galvanized steel.
6) Hearing protection. You need it more than you think you do. I have hearing loss from years in server rooms in the 1990's.
7) Respect even the small machines. A small milling machine or lathe can't take off your hand as quickly as a radial saw, but it can still maim you quite badly.
8) Respect anything with a cutting edge even if not powered. Sure, an unpowered cutting edge probably won't kill or permanently maim you, but that doesn't mean you can get careless. I see people change milling bits without wrapping the bit in cloth while they hold it all the time. Generally, those same people wind up with scars across the palm of their hand. I suspect the lowly utility knife causes more injuries than any other tool.
9) Powders are really damn dangerous. In addition to being highly flammable and explosive, they get in your lungs and don't come out easily. Sawdust from real wood is bad--sawdust from particle board is worse. It has all manner of nasty shit in it.
10) Volatile organics are worse than you think. Acetone, kerosene, paint thinner, etc. do nasty things to you. If people can use it for "huffing", it probably is nasty to your brain. Ventilate these things much better than you would for everything else.