2 ms·
Installing partitions in the pool to isolate each reactor should be a very minor expense. They need not even be self-supporting, just watertight enough to prev
by sandworm101 10y ago
Installing partitions in the pool to isolate each reactor should be a very minor expense. They need not even be self-supporting, just watertight enough to prevent mixing.
Builing a larger or more partitioned pool shouldnt even enter into the cost equation imho. Water and concrete are rather cheap given the context.
- nine_k 10y agoDraining one section becomes problematic if walls cannot support the weight of the water.
- Animats 10y agoCompare the Babcock and Wilcox (now BWXT) design in the same document. They have a full large containment building around each reactor. If you have a full, large containment structure, serious reactor troubles at the meltdown level are expensive, like Three Mile Island, but not disasters, like Fukushima. At Fukushima, the containment on the plant was a small vessel around the reactor vessel, like NuScale, and it wasn't able to contain the meltdown. NuScale's design assumes there will never be a meltdown.
- marze 10y agoWhy have a common pool in the first place? To save the cost of individual pools? That can't be much compared to the overall costs. More likely you share a common cooling system between reactors. And maybe containment?
- sandworm101 10y agoI think that nuscale approach means there is no cooling system. The reactors are small enough for the pool to passively cool them if so needed.
- deleted 10y ago[deleted]