3 ms·
Wait wait wait. Are all screen interfaces the same? You can just replace the motherboard of any brand TV and it will work? Do all panels use the same voltage/pi
by StavrosK 10y ago
Wait wait wait. Are all screen interfaces the same? You can just replace the motherboard of any brand TV and it will work? Do all panels use the same voltage/pins/protocol? That's huge, if so.
- wernercd 10y agoedited because I misread the thread
- StavrosK 10y agoHuh? I don't think you realize what either I or the GP are saying. I'm asking whether the LED/LCD panel on all TVs use the same protocol to drive the pixels, which is how it would be possible for the GP to replace his motherboard with a generic alternative.
- erentz 10y agoWoah woah woah. I'm also interested in this. I have a 47" LG Google TV that is horrible to use, very slow, terrible interface that keeps crashing, and seems to never get any updates. The screen is great though, I have a Roku plugged in and would love to just flash the Google TV OS off it with something dumb that booted it into dumb screen only mode. I didn't know I could replace the motherboard like this so easily.
- matt_wulfeck 10y agoIt's so bad that simply turning it on to HDMI 1 is painful? I have a "smart" tv that really is just a display for the much better AppleTV.
- khedoros1 10y agoI've done something similar with an old laptop LCD panel, using an LVDS controller that I bought on Ebay. I assume that's basically what noonespecial did, but hopefully with a board that has more TV-useful features (mine just takes HDMI, VGA, and RCA video input, if I'm remembering correctly).
- awqrre 10y agoI don't have the same IOs in my TV, so at least that would need to be modified (unless you can install it outside of your TV)...
- noonespecial 10y agoA vast number of lcds use fairly common lvds interfaces. Boards like the one I bought are compatible with hundreds of screens, native resolutions and signal formats. You pick the resolution, voltage, and format by placing a file on a USB stick and flashing the board. You do have to look up the panel in question to make sure you get it right. You also must deal with the back light. Mine was modern, so easy. Just a 12 volt led. If it's an old cold cathode, you need a separate high voltage driver. I'd let a screen like that go. You've got better things to do... I glammed mine up by 3d printing a new little plate for the back to match my new board but that's not necessary.
- StavrosK 10y agoHuh, wow, that's fantastic news! No need to toss the whole TV if the motherboard dies, then (or, really, any other component except the panel itself). Where did you get the firmware from, by the way?
- BuuQu9hu 10y agoFirmware should be on the board before you buy it.
- noonespecial 10y agoIt still a bit of a walk on the Chinese wild side. This should help. https://sites.google.com/site/lcd4hobby/5-lcd-as-pc-hdmi-av-tv-multidisplay https://sites.google.com/site/lcd4hobby/5-lcd-as-pc-hdmi-av-...
- StavrosK 10y agoThank you!