7 ms·
Mini Cannon Firing and Destroying Targets
- jrockway 17y agoNo amount of Internet fame would motivate me to intentionally break a glass next to my desk. Glass is pain to clean up, and when you miss a tiny shard, you will know it... someday. Also, how does this compare to a BB gun?
- bshep 17y agoI thought the same thing... also shooting at the egg right next to his computer, not a good idea, what if it splattered on the keyboard. Also, where do I get one?
- ido 17y agoIn the youtube comments he says he made it himself.
- jacquesm 17y agoThe egg splattering on to the keyboard would not happen because there is not enough kinetic energy in that small bullet to make it splash back very far, the lightbulb though for sure put some fragments in to his keyboard because the shards bounce off each other and will cause some shards to go in the opposite direction of where the bullet came from. See here for some more 'bullet impact' video: http://www.youtube.com/watch?v=QfDoQwIAaXg http://www.youtube.com/watch?v=QfDoQwIAaXg
- mhb 17y agoTaig lathe and mill: http://www.taigtools.com/mmill.html http://www.taigtools.com/mmill.html Brass: http://www.mcmaster.com/#brass/=70iaxr http://www.mcmaster.com/#brass/=70iaxr
- jacquesm 17y agoThe difference with a BB gun is I think mostly the length of the barrel, I'm surprised he could get that much accuracy out of such a short barrel.
- pmiller2 17y agoWhat difference would barrel length make? Most BB gun barrels aren't rifled, and that's the only thing I can think of that would make a longer barrel more accurate.
- jacquesm 17y agoBeing rifled imparts spin to a bullet, being long compared to the length of the bullet gives you the ability to align the barrel with the target. The shorter the barrel the bigger the chance of mis-alignment. Barrels were long before they got rifled. Rifling is mostly to keep a bullet on its trajectory once it leaves the barrel, it doesn't do much good if you can't aim the gun. A longer barrel definitely makes it easier to do this though.
- orborde 17y agoI'd be cagey about building one of these; that little charge of gunpowder may well be enough to inject that little ball a nontrivial distance into me.
- hugh3 17y agoSounds like a good reason to be cagey about firing one of these.
- deleted 17y ago[deleted]
- staunch 17y agoI wonder what how/if the ATF classifies these. I want one.
- sown 17y agoI was wondering that same thing myself. As the technology gets better the chances of being able to "download" a gun and print it out become higher.
- erikstarck 17y agoI wonder how the mass adoption of 3D printers will increase the availability of guns. I mean, you can just download and print one (if the material used when printing is strong enough, of course). And it doesn't stop there. A friend of mine is a transhumanist philosopher at Oxford. He ranks home made viruses as the number one threat to mankind this century. Anyway, cool video.
- PostOnce 17y agoSo far as I know, no plastic guns exist, our plastics technology just isn't there yet. Even if it were, it wouldn't be the same sort of plastic you feed into a 3D printer, or at least any off-the-shelf one. I too have wondered about this. I also wonder about machinists moonlight as arms manufacturers :P relevant plastic guns article: http://www.straightdope.com/columns/read/1202/is-it-possible-to-make-an-undetectable-nonmetal-gun http://www.straightdope.com/columns/read/1202/is-it-possible...
- Devilboy 17y agoNot all 3d printers use plastic, there are processes for most metals including titanium. They work by depositing layers of metal dust and fusing it with lasers. The resulting parts can be very strong depending on the process.
- PostOnce 17y agoSounds ridiculously expensive and incredibly entertaining. Thanks for alerting me to something I need to read about :)
- jacquesm 17y agoThe amount of extra material needed because of the structural weakness of sintered/deposited materials as opposed to machined materials would probably make such a gun fairly bulky, unless you are willing to take the risk of the breech portion exploding when firing the gun. You could offset that to some extent by using less powder in the charges or you could use the gun for what they're used most for anyway (threat, rather than use). Some companies are very far now in the production of single units or small series of parts for prototype or one-off purposes, every year the field moves ahead steadily and it is very impressive what can be done, but there is no substitute (yet) for a single properly treated chunk of steel machined to the right dimensions. Parts made like this are rapidly replacing machined parts in places where strength is not such a big issue, you'll find them in just about anything that has a mechanical component to it. But they are not yet able to compete with machined materials for the most demanding applications. Especially tensile strength is rather low, and pieces tend to be brittle.
- pirko 17y agoHeavy smoker?
- mhb 17y agoWhy is the ball going up?
- bad_alloc 17y agoMaybe he didn't drill straight.
- mambodog 17y agoWhen I saw the title of this post my brain brought up mental images of 'minigun' and 'autocannon' and sort-of combined the two, and as such this really wasn't what I was expecting... neat, though.