3 ms·
Not sure if this was the issue, but some grades of stainless steel screws can't be used with treated lumber because of an increased corrosion risk. The rule mi
by cma 10y ago
Not sure if this was the issue, but some grades of stainless steel screws can't be used with treated lumber because of an increased corrosion risk. The rule might have been in to simplify inspections.
- stuckagain 10y agoAlso screws have poor toughness compared to nails, and should never be used for framing. Just because it looks strong doesn't mean it is strong.
- scaryspooky 10y agoNails have higher shear strength and screws have higher tensile strength. That's the reason nails are used for framing and those nails are typically covered in a heat activated cement to prevent pull out.
- rsync 10y ago"Not sure if this was the issue, but some grades of stainless steel screws can't be used with treated lumber because of an increased corrosion risk." If it's actually stainless, that is an approved connector for treated lumber. It's more expensive than galvanized, but much more resistant.[1] It's plain old steel - untreated - that has very bad galvanic corrosion properties inside of treated lumber. [1] http://www.finehomebuilding.com/2012/09/06/whats-the-difference-fasteners-for-pressure-treated-lumber http://www.finehomebuilding.com/2012/09/06/whats-the-differe...
- cma 10y ago"All stainless steels may not be acceptable for use with preservative treated wood. Testing has shown that Types 304, 305 and 316 stainless steels perform very well with woods that may have excess surface chemicals. Type 316 stainless steel contains slightly more nickel than other grades, plus 2-3% molybdenum, giving it better corrosion resistance in high chloride environments prone to cause pitting such as environments exposed to sea water." https://www.strongtie.com/products/product-use-information/corrosion-information/pressure-treated-wood-faq https://www.strongtie.com/products/product-use-information/c...