4 ms·
I need as much bandwidth as I can get over a pretty short distance -- let's say 30 feet. I'm bridging two closets at opposite ends of a hallway. One closet has
by csmajorfive 10y ago
I need as much bandwidth as I can get over a pretty short distance -- let's say 30 feet. I'm bridging two closets at opposite ends of a hallway. One closet has the WAN connection. The other closet has a bunch of hard wire gear (NAS, home theater, etc).
- Johnny555 10y agoYou could use a pair of airfiber stations to get over 1 Gbit/sec. But they are not cheap. You'd probably be better off finding a way to run fiber (or even cat5) to get 10 gigabit.
- csmajorfive 10y agoWell my current solution works fine. I have an AC87 in each closet. The one with the gear runs in "wireless bridge" mode. I'm attracted to the prosumer Unifi stuff but there doesn't seem to be a simple solution to bridging. The airFiber units in our hallway is a little too much. And there's no easy way to run cat5.
- Johnny555 10y agoIts hard to get simpler or cheaper than a pair of $60 Nanobeams that will give you 400+ mbit of performance and the integrated 16dBi antennas will help reduce interference from other devices. Ubiquiti also has a Litebeam with a 23dBi antenna that's even cheaper - $49... I don't have any experience with those, but I assume they would work just as well (but proper aiming would be a little more critical with the higher gain antenna) If your existing routers live in the closets, the Nanobeams can too, you just need to aim them at each other.