5 ms·
The problem with open source is that the hardware is rarely "open enough", and the software is a small enthusiast niche so it's rarely polished and "complete".
by alkonaut 10y ago
The problem with open source is that the hardware is rarely "open enough", and the software is a small enthusiast niche so it's rarely polished and "complete".
I'd rather accept that the installation has a lifers of 10 years and just buy a proprietary system complete with service and guarantees, then rip it out and replace it all in 10 years.
Agree on wired - and also, smart switches etc have to be usable with standard light switches and power sockets otherwise you are stuck with a tiny selection of ugly fixtures.
- crooked-v 10y agoHome Assistant (https://home-assistant.io https://home-assistant.io) is actually pretty great when it comes to software. It's got a nicely polished dashboard you can stick up on status screen / touch panels, a text-based but relatively straightforward configuration, and support for all kinds of general-purpose standards and specific platforms.
- alkonaut 10y agosimilar to OpenHAB it seems but perhaps more recent? like most open source it's a thing for tinkerers. I absolutely do not want to compile python-openzwave after making sure I have at least cython version x.., I don't find this kind of stuff straigtforward at all, and I enjoy a dentist chair more than a bash prompt :D I'd rather pay for a proprietary system. The best thing would be an open proprietary system, i.e a future-proof and moddable one, but one where I have paid humans to do tons of testing and polish.
- crooked-v 10y agoIt's actually designed to auto-install most necessary prereqs (as pip packages) the first time they're needed, so the only real command line thing needed (if editing the yaml files doesn't count) is the initial pip install.
- alkonaut 10y agoOK, maybe I had bad luck browsing the docs to stumble over the odd component (z-wave) that required manual compilation, cython and so on. It's just that this component was the single component I needed...
- deleted 10y ago[deleted]
- StavrosK 10y agoI should write about my smart home setup, if nothing else, just to give you guys ideas. I've designed and fabricated light and temperature sensors that I've placed in every room, and lights are controlled by a combination of Sonoff switches (they're great, I've written my own firmware for them (https://gitlab.com/stavros/sonoff https://gitlab.com/stavros/sonoff) and YeeLight lamps (I've written my own library and cli client: https://yeelight.readthedocs.io/en/latest/ https://yeelight.readthedocs.io/en/latest/, https://gitlab.com/stavros/yeecli/ https://gitlab.com/stavros/yeecli/). My sensor boards (https://github.com/skorokithakis/esplights https://github.com/skorokithakis/esplights) can also output RF and IR so I can control various devices in the room, like TVs and ACs. I've hooked this all up to a small Python script that talks to the devices over an MQTT server, separated the network for all this crap into a vlan with no access anywhere (other than the MQTT server and the OTA firmware upgrade server), and now I can successfully sound like a lunatic with way too much free time on the internet.
- notyourwork 10y ago> and now I can successfully sound like a lunatic with way too much free time on the internet. Had me at "I've written my own firmware for them ". :-)
- StavrosK 10y agoIt really really wasn't that hard, have a look through the code, it's just a hundred lines or so, IIRC.
- lawik 10y agoSweet lunacy, you make me envy your free time. How do you usually use the system? Automation? Remote control. I get what it can do, curious what you actually fo with it :)
- StavrosK 10y agoBoth, I have it set so lights go on and off when someone enters/exits the room, it logs temperature in rooms just because, and I have a task on my phone (using Tasker) with an NFC tag on my nightstand that turns everything off when I go to bed. It's nice to not have to touch any light switches ever, you walk into a room and the lamp just slowly fades into light. I know how crazy this sounds (because I roll my eyes at people who say "I have a task on my phone" too), but it's not really very hard to do. I control everything through an HTTP message queue I wrote (https://github.com/skorokithakis/gweet/ https://github.com/skorokithakis/gweet/) and a simple Android app I... also wrote... and... I should get fewer hobbies.