4 ms·
... Looking at that early 50 ohm coax ethernet tap, it's amazing... Now we have $200 Intel 10GbE NICs with 1310nm LX SFP+ (the SFP costs $22) in some linux desk
by walrus01 10y ago
... Looking at that early 50 ohm coax ethernet tap, it's amazing... Now we have $200 Intel 10GbE NICs with 1310nm LX SFP+ (the SFP costs $22) in some linux desktops and real world 9000+ Mbps speed tests bidirectional to an internal test server.
Or look at it another way, 1U rackmount 48-port line rate 10GbE SFP+ Arista switches from a few years ago are now available for $1000 from datacenter operators that have upgraded to QSFP/100GbE spine switches.
- protomyth 10y ago> SFP costs $22 Who and where are you buying SFP+ for $22? Most of them are above $200 for 10GbE.
- snuxoll 10y agoTwinax DAC's cost about that much, assuming you don't need a long run. Hell, I bought two Mellanox Connect-X 2 cards + a twinax cable for my home (direct connection between my FreeNAS box and my TD340 running oVirt) for under $100.
- walrus01 10y ago$15 each for 2.5 meter http://www.fs.com/c/10g-sfp-dac-1114 http://www.fs.com/c/10g-sfp-dac-1114
- scurvy 10y agoCannot tell you in enough harsh language to avoid fs.com. I've had enough DOA and mis-flashed parts to swear them off forever. Really bad stuff. If you just want regular DAC, go straight to Mellanox (they have an online store) or Amphenol (cables on demand). If you need to support a lot of vendors and not run up your costs in sparing, use something like the FlexOptix FlexBox. But, seriously, avoid fs.com.
- snuxoll 10y agoI've had luck buying off marketplace sellers on Amazon as well, but YMM (I've bought a pair of HP 4Gb FC cards for $40, the Mellanox NICS, DAC's, a dirt cheap LSI 9200-8e for $30, the list goes on - most of it's been new in box even).
- walrus01 10y agoWe've been buying a shitload of patch cables, patch panels, pigtails, splicing supplies and other non electronic fiber stuff from them and have had no higher rate of defects than any other vendor. The optics are indeed suspiciously cheap.
- walrus01 10y agoOkay, $34, but that's before any quantity discount. For ordinary intra-building 1310nm LX links between equipment. http://www.fs.com/products/11555.html http://www.fs.com/products/11555.html
- deleted 10y ago[deleted]
- scurvy 10y agoThey're about $10-15 for genuine OEM gear on eBay.
- digi_owl 10y agoI am tempted to say the world took a step backwards when it moved to thin coax with those BNC connectors and terminators. And the less i say about fiddling with TP and modular connectors the better. Being able to lay down a loop of coax, and then just clamp on as needed seems like heaven (though i guess having all those switches allows for much better throughput).
- protomyth 10y agoI much preferred the thin coax and BNC compared to thick. Maybe its because it was easier to educate helpers. The funny part was having a network of thin coax connected to 10baseT. Now I have fibre and gigabit, so I never really got to that one solution again.
- gamache 10y agoHeh. I tell my younger coworkers about vampire taps and they think I'm pulling their leg.
- Lio 10y agoI remember being told during CCNA training, back in 2001ish, that there were basically 2 types of network engineer. Those who had brought down an ethernet network whilst installing a vampire tap ...and those who were going to.
- scurvy 10y agoInsert joke here about network engineers scouring the floor for the lost token in a open-ended TokenRing network.