3 ms·

Here are 3 links that might be usefull: http://rooftopbazaar.com/routerfirmware/ http://rooftopbazaar.com/routerfirmware/ https://www.reddit.com/r/openwrt/comm

Here are 3 links that might be usefull: http://rooftopbazaar.com/routerfirmware/ http://rooftopbazaar.com/routerfirmware/ https://www.reddit.com/r/openwrt/comments/423rn6/best_2015_openwrt_router_by_price_range/ https://www.reddit.com/r/openwrt/comments/423rn6/best_2015_o... https://www.reddit.com/r/openwrt/comments/36s530/better_ac_router_than_tplink_archer_c7/ https://www.reddit.com/r/openwrt/comments/36s530/better_ac_r... Initially I was also planning to buy the Archer C7 but it seems OpenWRT is not flawless on it. This is unfortunate since that appears to be the recommended router for OpenWRT, so there is nothing on which OpenWRT works perfectly. That was the situation 10 months ago. I'm not sure if things have changed since then. If they did, the OpenWRT has not been updated: https://wiki.openwrt.org/toh/tp-link/tl-wdr7500 https://wiki.openwrt.org/toh/tp-link/tl-wdr7500 According to some recentish posts on their forum there may be hope: https://forum.openwrt.org/viewtopic.php?pid=342710#p342710 https://forum.openwrt.org/viewtopic.php?pid=342710#p342710 I wonder if it isn't better to just go DIY ( http://arstechnica.co.uk/gadgets/2016/09/diy-homebrew-router-speed-testing/ http://arstechnica.co.uk/gadgets/2016/09/diy-homebrew-router... ) with pfSense or with the PCEngines apu1d4 and use a separate switch and access point. Right now, it is very important to have a router with firmware you can trust and upgrade, otherwise sooner or later it will join a botnet. Therefore for me any router option without FLOSS firmware support is eliminated. Edit: Just read the comment above about OpenWRT being dead. Looking into LEDE.

Gruselbauer 10y ago
I am running an Archer C7 v2 on OpenWRT. Works flawlessly. Some notes though: - 5ghz only worked after manually inserting the latest firmware blob for the qca9880 chip and setup only works via shell for it, setting any options for it from the web interface breaks stuff - it's fast enough... I'm running a freeradius2 server on it, SMB shares on two 32gb USB pendrives, miniDLNA, DHCP for ~50 physical and virtual clients, a VPN tunnel to a VPS and so on. Never hits full load. - 2.4ghz range is massive, 5ghz less so obviously... - it is absolutely stable however, uptime exceeds two months and the only reason for shutting it down back then was a move, almost nine months before that If you're simply looking for APs I would recommend Unifi UAP-AC-Pros though.
- floatboth 10y ago
  I didn't even have to install any blobs, 5GHz just worked. I think mine is a v2 as well.
  - Gruselbauer 10y ago
    If 5ghz works it's a v2 I think. Install is a while in the past, so if it worked out of the box for you all the better :)

Gruselbauer 10y ago

I am running an Archer C7 v2 on OpenWRT. Works flawlessly. Some notes though: - 5ghz only worked after manually inserting the latest firmware blob for the qca9880 chip and setup only works via shell for it, setting any options for it from the web interface breaks stuff - it's fast enough... I'm running a freeradius2 server on it, SMB shares on two 32gb USB pendrives, miniDLNA, DHCP for ~50 physical and virtual clients, a VPN tunnel to a VPS and so on. Never hits full load. - 2.4ghz range is massive, 5ghz less so obviously... - it is absolutely stable however, uptime exceeds two months and the only reason for shutting it down back then was a move, almost nine months before that If you're simply looking for APs I would recommend Unifi UAP-AC-Pros though.

floatboth 10y ago
I didn't even have to install any blobs, 5GHz just worked. I think mine is a v2 as well.
- Gruselbauer 10y ago
  If 5ghz works it's a v2 I think. Install is a while in the past, so if it worked out of the box for you all the better :)