4 ms·

That's neat, I'd like to build something like that. I'm more of a raspberry pi+linux kind of person though.. do you have individual links for each of those par

That's neat, I'd like to build something like that. I'm more of a raspberry pi+linux kind of person though.. do you have individual links for each of those parts? The linked code seems straightforward enough, but I wouldn't know what to buy to start with.

emilburzo 10y ago
I don't know if these work for raspberry pi, but that's what I'm using: RX+TX: http://eud.dx.com/product/geeetech-superheterodyne-3400-wirelesss-receiver-433mhz-rf-transmitter-kit-green-844370793 http://eud.dx.com/product/geeetech-superheterodyne-3400-wire... Temperature/humidity: http://eud.dx.com/product/arduino-dht11-digital-temperature-humidity-sensor-844138531 http://eud.dx.com/product/arduino-dht11-digital-temperature-... TX with more range (using it just for the outside sensor): http://eud.dx.com/product/zsd-t3-315-433mhz-ask-high-power-rf-transmitter-module-yellow-844228289 http://eud.dx.com/product/zsd-t3-315-433mhz-ask-high-power-r... Small breadboard: http://eud.dx.com/product/solderless-breadboard-with-400-tie-point-white-844121534 http://eud.dx.com/product/solderless-breadboard-with-400-tie... Cables: http://eud.dx.com/product/chuangzhuo-male-to-male-male-to-female-female-to-female-arduino-dupont-cable-3-x-40-pcs-844278367 http://eud.dx.com/product/chuangzhuo-male-to-male-male-to-fe... Oh yeah, if you're from the US, I think you need to get the 315MHz version (instead of the 433MHz), so be sure to double check that.
- justinsaccount 10y ago
  What about the attiny84 thingy itself?
  - emilburzo 10y ago
    I misunderstood your first post, I thought you wanted to replicate the setup on a raspbpi. In that case, you should get the attiny84 from anywhere reputable. I got it from here: https://www.amazon.co.uk/gp/product/B00P4E2XUC https://www.amazon.co.uk/gp/product/B00P4E2XUC You are also going to need a battery holder: http://eud.dx.com/product/diy-4-5v-3-slot-3-x-aa-battery-holder-case-box-with-leads-black-844322311 http://eud.dx.com/product/diy-4-5v-3-slot-3-x-aa-battery-hol... And I'm using this arduino for the master RX hub: http://eud.dx.com/product/new-nano-v3-0-module-atmega328p-au-improved-version-for-arduino-yellow-844369070 http://eud.dx.com/product/new-nano-v3-0-module-atmega328p-au... And if you want to make your life easier, a little extractor tool: http://eud.dx.com/product/proskit-908-609-ic-chip-extractor-removal-puller-tool-green-silver-844184206 http://eud.dx.com/product/proskit-908-609-ic-chip-extractor-... To program the attiny84, see @gh02t's post[1]. I opted for the use-another-Arduino-as-the-programmer method[2] -- I don't know if you can do it with the nano, I did it with an old Arduino Duemilanove I had laying around. And here's a fritzing sketch[3] (ignore the fact that there are 4 batteries, the library didn't have a model for the 3 battery case holder). If you need help with anything after they arrive, feel free to email me (email is on profile website). [1] https://news.ycombinator.com/item?id=13068361 https://news.ycombinator.com/item?id=13068361 [2] http://highlowtech.org/?p=1695 http://highlowtech.org/?p=1695 [3] https://raw.githubusercontent.com/ambient-monitoring/node/master/node_breadboard.png https://raw.githubusercontent.com/ambient-monitoring/node/ma...

emilburzo 10y ago

I don't know if these work for raspberry pi, but that's what I'm using: RX+TX: http://eud.dx.com/product/geeetech-superheterodyne-3400-wirelesss-receiver-433mhz-rf-transmitter-kit-green-844370793 http://eud.dx.com/product/geeetech-superheterodyne-3400-wire... Temperature/humidity: http://eud.dx.com/product/arduino-dht11-digital-temperature-humidity-sensor-844138531 http://eud.dx.com/product/arduino-dht11-digital-temperature-... TX with more range (using it just for the outside sensor): http://eud.dx.com/product/zsd-t3-315-433mhz-ask-high-power-rf-transmitter-module-yellow-844228289 http://eud.dx.com/product/zsd-t3-315-433mhz-ask-high-power-r... Small breadboard: http://eud.dx.com/product/solderless-breadboard-with-400-tie-point-white-844121534 http://eud.dx.com/product/solderless-breadboard-with-400-tie... Cables: http://eud.dx.com/product/chuangzhuo-male-to-male-male-to-female-female-to-female-arduino-dupont-cable-3-x-40-pcs-844278367 http://eud.dx.com/product/chuangzhuo-male-to-male-male-to-fe... Oh yeah, if you're from the US, I think you need to get the 315MHz version (instead of the 433MHz), so be sure to double check that.

justinsaccount 10y ago
What about the attiny84 thingy itself?
- emilburzo 10y ago
  I misunderstood your first post, I thought you wanted to replicate the setup on a raspbpi. In that case, you should get the attiny84 from anywhere reputable. I got it from here: https://www.amazon.co.uk/gp/product/B00P4E2XUC https://www.amazon.co.uk/gp/product/B00P4E2XUC You are also going to need a battery holder: http://eud.dx.com/product/diy-4-5v-3-slot-3-x-aa-battery-holder-case-box-with-leads-black-844322311 http://eud.dx.com/product/diy-4-5v-3-slot-3-x-aa-battery-hol... And I'm using this arduino for the master RX hub: http://eud.dx.com/product/new-nano-v3-0-module-atmega328p-au-improved-version-for-arduino-yellow-844369070 http://eud.dx.com/product/new-nano-v3-0-module-atmega328p-au... And if you want to make your life easier, a little extractor tool: http://eud.dx.com/product/proskit-908-609-ic-chip-extractor-removal-puller-tool-green-silver-844184206 http://eud.dx.com/product/proskit-908-609-ic-chip-extractor-... To program the attiny84, see @gh02t's post[1]. I opted for the use-another-Arduino-as-the-programmer method[2] -- I don't know if you can do it with the nano, I did it with an old Arduino Duemilanove I had laying around. And here's a fritzing sketch[3] (ignore the fact that there are 4 batteries, the library didn't have a model for the 3 battery case holder). If you need help with anything after they arrive, feel free to email me (email is on profile website). [1] https://news.ycombinator.com/item?id=13068361 https://news.ycombinator.com/item?id=13068361 [2] http://highlowtech.org/?p=1695 http://highlowtech.org/?p=1695 [3] https://raw.githubusercontent.com/ambient-monitoring/node/master/node_breadboard.png https://raw.githubusercontent.com/ambient-monitoring/node/ma...