5 ms·
I am about 99.9% certain that these will not be powered by consumer grade Si solar cells in special panels/encapsulation. Satellites typically use triple juncti
by walrus01 10y ago
I am about 99.9% certain that these will not be powered by consumer grade Si solar cells in special panels/encapsulation. Satellites typically use triple junction GaAs cells (>30% efficient) which are rated for space:
https://www.google.com/search?q=spectrolab+gaas&ie=utf-8&oe=utf-8&client=firefox-b https://www.google.com/search?q=spectrolab+gaas&ie=utf-8&oe=...
https://en.wikipedia.org/wiki/Multi-junction_solar_cell https://en.wikipedia.org/wiki/Multi-junction_solar_cell
Spectrolab is owned by Boeing.
- craigds 10y agoTypically, but SpaceX has made rather a habit of ignoring expensive space-grade components in favour of consumer-grade ones they test themselves for a fraction of the cost. I guess we'll see.
- akiselev 10y agoSpaceX has made a habit of doing that only for their rockets, not telecommunications satellites, and only when it makes sense. Their biggest cost savings are in operations, manufacturing processes, and their engines because there really isn't much room to skimp on anything else. Even at a cost of $10k per kg it makes very little sense to use 50% less efficient solar panels to save a few thousand, especially when the superior technology is also far better tested in space. It makes sense to use an Android instead of a $100k RAD hardened processor if your entire CubeSAT barely costs that much. Since most satellites cost a minimum of a million each, very few can afford the risk to save money on parts (and if you're mass producing thousands of them you can get really cheap germanium panels).
- walrus01 10y agoCumulative Wh produced per sunlight/night cycle (remember these are in LEO and constantly passing in and out of the earth's shadow) per kilogram of solar panel is also important, when the satellites will be quite small. You want the greatest possible power capability in the smallest and lightest package, and right now the way to do that is a triple or quadruple junction GaAs type PV cell with a concentrator lens in front of it. Efficiencies range from 32 to 40%, vs 22.5% efficiency for the very best monocrystalline Si PV cells.
- madaxe_again 10y agoThis is all absolutely true - and would apply in any typical circumstance - but I'm not sure this is typical. These aren't geostationary - they're low earth orbit. This means several things: - cheap to launch - and to deorbit. - lots of erosion compared to GEO - LEO is like being in a mild sandblaster while occasionally being shot at by rifles and howitzers. Taking those two alone into account, you either end up building for durability or for disposability. When you're dealing with a fleet of 4000 and your speciality/the thing you want to practice is heavy lift to LEO/MEO, you are absolutely talking about a disposable fleet where you expect daily failures and replacements. Having mass production facilities at your fingertips can't hurt. Which is why they'd likely go for the cheaper tech that they have very low cost access to, even if it costs about the same after launch costs. Also, it would be more profitable for the collective enterprises than outsourcing such a component to a third party. Think about it - spend the money with a competitor, or at the gas station. I know which I'd do. So - despite obvious truths re GaAs, my money is on them using their own Si cells.
- schiffern 10y ago>lots of erosion compared to GEO - LEO is like being in a mild sandblaster while occasionally being shot at by rifles and howitzers. At 1100 km the debris population is relatively sparse. https://en.wikipedia.org/wiki/File:Spacedebris_upd_2011.jpg https://en.wikipedia.org/wiki/File:Spacedebris_upd_2011.jpg
- TeMPOraL 10y agoBut in lower parts of LEO you still have meaningful amounts of atmosphere(!).
- akiselev 10y agoI think you're vastly overestimating the significance of satellite material cost and underestimating how much larger assembly, testing, and operating costs are going to be. Four thousand satellites sounds like a lot and it is in the single unit volume world of aerospace, but it's not even close to enough to reach the kind of economy of scale everyone thinks about when they hear the phrase mass manufacturing. The cost of parts will be tiny compared to the cost of assembly and testing. To give you some perspective, you can get a 80mmx80mm 28% efficient GaAs solar cell for about $600 on Alibaba and the equivalent Si cell is about $6 with about 20% efficiency. At the volumes needed for a constellation of thousands, from a reputable vendor like Spectrolab, the price difference is in the 50-100x range so assuming a $1 Si cell the equivalent GaAs cell will cost $50. Do you see how small the difference is in absolute terms? That means that only a few hours of labor per solar cell or 100g of launched payload mean the difference between a 50x and 1x difference. Two GaAs panels ($100) will requires tens of grams less support structure than the three Si panels producing the same power ($3) so already the extra launch cost (at $5k per kg, assuming free payload support structure) for the Si panels is eating away at their benefit. Each solar cell will need hours of inspection and testing by people paid $25+/hr so even if each extra Si cell and support structure costs nothing to launch, the final cost once fully assembled, installed, and tested will be in the range of $1k-10k per solar cell. Especially at the scale of disposable satellites, GaAs is likely to be cheaper, more efficient, and free more volume and mass in the satellite design. 4000 satellites worth of Si solar cells would be the equivalent of a few dozen decent sized residential installs so it would be a drop in the bucket for SolarCity. I don't think keeping such small scale business in-house is much of an advantage, especially when there are many other suppliers with lots of experience in using solar cells in space.
- pricechild 10y agoDo SpaceX build telecommunications satellites?
- phkahler 10y ago>> Do SpaceX build telecommunications satellites? They have a satellite division which has a bunch of people designing things, but they have not launched their own yet. They have also made known their intention of fielding a global internet service via a large constellation of satellites. This application would be a step toward that goal.
- greglindahl 10y agoNot yet. It's worth noting that the OneWeb constellation of small satellites is going to be produced in a new factory, because existing ones aren't set up for assembly-line production: http://spacenews.com/oneweb-satellites-to-settle-in-exploration-park-florida-with-eyes-on-business-beyond-oneweb/ http://spacenews.com/oneweb-satellites-to-settle-in-explorat... https://en.wikipedia.org/wiki/OneWeb_satellite_constellation https://en.wikipedia.org/wiki/OneWeb_satellite_constellation This means that existing companies that build telecom satellites need to do it a new way for these constellations of lots of small satellites.
- planteen 10y agoSure, you can use commercial parts in LEO for the processor. That is very common in the small satellite world already. But I really doubt they would run Android. Why not just bare Linux, possibly with the PREEMPT_RT patchset, or another RTOS? Especially since attitude control is a real-time problem.
- greglindahl 10y agoSpaceX already runs Linux on their rockets; apparently near-real-time is good enough for that purpose.
- planteen 10y agoYes, I was saying why would you use Android instead of just bare Linux (as in Yocto). I doubt you will be writing an ADCS application in Java using a GUI. Also, I think the Falcon 9 uses VxWorks for at least some of its realtime control: http://blogs.windriver.com/vxworks/2010/12/vxworks-helping-commercial-spaceflight-become-a-reality.html http://blogs.windriver.com/vxworks/2010/12/vxworks-helping-c...
- greglindahl 10y agohttp://lwn.net/Articles/540368/ http://lwn.net/Articles/540368/ doesn't mention VxWorks.
- monocasa 10y agoThat article also says > One of the areas they focus on is scheduler performance. They do not have hard realtime requirements, but do care about wakeup latencies, he said. It sounds like their hard real time controls are on non-Linux OSs.
- planteen 10y agoLooks like Dragon runs VxWorks, see under Flight Software. http://www.spacex.com/sites/spacex/files/pdf/DragonLabFactSheet.pdf http://www.spacex.com/sites/spacex/files/pdf/DragonLabFactSh... Can anyone who works at SpaceX chime in?
- deleted 10y ago[deleted]
- deleted 10y ago[deleted]
- deleted 10y ago[deleted]
- samstave 10y agoQuestion: whenever SpaceX launches a thing to the ISS - do they have an experimental payload along for the ride to "test some shit out"?
- 3Pi 10y agoIt's worth noting that the SpaceX satellites only have a mission length of 5-7 years, and the Spectrolab solar panels are built to last for a typical 15 length mission (from the link you provided). Perhaps they will opt for (presumably) cheaper components given the shorter lifetime.
- walrus01 10y ago15 years is the nominal design lifetime for an "insured" geostationary telecom satellite... When SES or Intelsat launches a new 3500 to 6000 kilogram sized satellite it's insured by a third party company. There's specialists in this. I'd say it's much more likely the SpaceX program will be self-insured so they can take a risk with satellite bus technology and other tech that has never been flown before. How this will affect their choice of PV cells I don't know. With 4000 satellites it's likely that their approach to each satellite will be smaller and much less redundancy: If a traditional 5000 kg geostationary telecom satellite can be compared in analogy to a big, expensive, 4U, quad socket xeon server that has multiply redundant everything. These small satellites might be much more like a facebook open compute blade server, 1+0 and redundant nothing, but much, much cheaper to build and with a software architecture tolerant of entire nodes failing and disappearing from the network.
- taneq 10y agoIt costs them a lot less per kg to lift to orbit, maybe they're just throwing more panel area at the problem? They're claiming 22.8% efficiency for their earthbound panels so that's only a ~50% increase in panel weight.
- raverbashing 10y agoI believe efficiency is the smallest of problems with sending stuff into space
- pol0nium 10y agoMore panels means more atmospheric drag in LEO. This leads to a shorter lifespan of the satellite.
- taneq 10y agoMaybe they're equipping them all with EM drives? :P
- TD-Linux 10y agoSee this picture of the Dragon spacecraft's panels: http://www.space.com/images/i/000/017/802/i02/spacex-dragon-solar-array-deployed.jpg?1337857228 http://www.space.com/images/i/000/017/802/i02/spacex-dragon-... They are very clearly Sunpower C60 or similar, a high end mono-Si cell. I am a bit skeptical about the economics too, but apparently it works for SpaceX.
- schwarrrtz 10y agoYeah, you'd think that if they were really optimizing those panels then they'd trim them down to cover the surface with no gaps. This is pretty common in solar racing, for example. http://www.blueskysolar.utoronto.ca/?p=922 http://www.blueskysolar.utoronto.ca/?p=922
- jedc 10y agoI know for a fact key Dragon solar array team members at SpaceX have extensive solar car racing experience, so if they're not trimming cells for maximum coverage, it's for a reason. (I would suspect the benefit doesn't outweigh the cost and/or risk.)
- TD-Linux 10y agoIt's common for many types of cells, but much more difficult for Sunpower cells. Instead of having top contacts, Sunpower cells have a fine array of contacts on the bottom [1]. Cutting this without creating shorts or defects is quite difficult. It would be better to have Sunpower custom make them. Given SpaceX deadlines it's possible that they just ran out of time for this optimization. [1] https://sc03.alicdn.com/kf/HTB1XRXrHVXXXXXeaXXXq6xXFXXXM/3-55W-5x5-A-grade-21-24-Highest-Efficiency-maxeon-Mono-Sunpower-C60-Solar-Cell-without.jpg https://sc03.alicdn.com/kf/HTB1XRXrHVXXXXXeaXXXq6xXFXXXM/3-5...